Sunroof controls acting wonky....
Thread Starter
Advanced
Joined: Feb 2009
Posts: 93
Likes: 0
Sunroof controls acting wonky....
All of a sudden my sunroof controls need a lot of fiddling with to get the roof to open. For instance...if the roof is just in tilt mode, I used to be able to open the roof by pressing and holding the open/back arrow portion of the button. Now I need to press the close/front arrow portion of the button and then press the open/back arrow part of the button. any thoughts are appreciated.
RL Community Team
Rennlist Member
Rennlist Member
Joined: Apr 2010
Posts: 6,287
Likes: 1,516
From: Ormond Beach, FL
IF I remember correctly, it works a little like resetting the upper and lower window limits. Press the close button and when it is closed continue to press the button for 10 seconds, then release. Press the open button and when it is open continue to press the button for 10 seconds then release. See if that helps.
Advanced
Joined: Jul 2012
Posts: 97
Likes: 1
From: Waltham, MA
All of a sudden my sunroof controls need a lot of fiddling with to get the roof to open. For instance...if the roof is just in tilt mode, I used to be able to open the roof by pressing and holding the open/back arrow portion of the button. Now I need to press the close/front arrow portion of the button and then press the open/back arrow part of the button. any thoughts are appreciated.
The consensus seems to indicate that this behavior of the switch button means that the motor needs to be replaced. I'm trying to figure out for sure if that's true..!
