nathan1

I posted this in the parts section but I figured one of your probably has your original wheels in your attic and are dying to help a fellow R-Lister out...

I am looking for a mint condition set of OEM 993TT hollow spoke wheels.

Part #"s-

Front 993 362 136 00

Rear 993 362 140 00

I need rears more than I need the fronts as I have a set of fronts, but I would prefer to buy a complete matched set. So if you just have rears PM me.

I will pay top dollar for a primo original set. I do not want a set that has been refinished or has any curb rash or damage. I am not interested in any other wheel, I need an OE concours quality setup for a 993tt.

C4S993

You could use 993 C4S TT look wheels (about 12 lbs total weight increase over 993 TT hollows) as no
one will crawl under the wheels to see if they end in end in .00 or 01.

nathan1

I agree that it's a little silly and not worth the hassle or aggravation BUT I suffer from OCD and since that is the "correct" i.e. the as delivered setup that is what I will install on the car.

The previous owner has offended the Porsche god by having the OE wheels chromed, painful! My other vent is the car was sold by a Porsche store and they had the wheels chromed for the original owner before new car delivery. They sent them out to a place that "exchanged" them as the wheels that came back were NB offsets and nobody noticed for 16 years! Looks like hell rear wheels sucked 25mm into the rear fenders! UGH!

chicabum

Nathan1, I suffer from the same OCD and The originals 993 TT hollows are worth the search. Weight saving 12lbs at the wheels probably would match saving around 75lbs inside the car and since you are "going there"... Are the wheel nuts the same on N.A Cars as in the turbos?