steering shimmy
#16
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
WORTHLESS WITHOUT PICTURES...:-)...old ones but not much has changed.
http://turbo2.shutterfly.com/pictures/13#11
From 251K...will get more at 300K.
picked car up tonight...'new' rotors that were just put on (less than 1k miles ago) were within 'spec' but were respun at Custom Alignment (thx Joe)...mechanic (Bob Grigsby at RMG in Sunnyvale) went well above the call of duty to help sort this out (thx Bob)...and also new tie rods were installed.
drove home...so far so good. will be curious to see if clunking noise also gone.
mike
http://turbo2.shutterfly.com/pictures/13#11
From 251K...will get more at 300K.
picked car up tonight...'new' rotors that were just put on (less than 1k miles ago) were within 'spec' but were respun at Custom Alignment (thx Joe)...mechanic (Bob Grigsby at RMG in Sunnyvale) went well above the call of duty to help sort this out (thx Bob)...and also new tie rods were installed.
drove home...so far so good. will be curious to see if clunking noise also gone.
mike
#18
Rennlist Member
Join Date: Sep 2008
Location: Flyoverland - Central, Ohio
Posts: 3,226
Received 247 Likes
on
176 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
WORTHLESS WITHOUT PICTURES...:-)...old ones but not much has changed.
http://turbo2.shutterfly.com/pictures/13#11
From 251K...will get more at 300K.
picked car up tonight...'new' rotors that were just put on (less than 1k miles ago) were within 'spec' but were respun at Custom Alignment (thx Joe)...mechanic (Bob Grigsby at RMG in Sunnyvale) went well above the call of duty to help sort this out (thx Bob)...and also new tie rods were installed.
drove home...so far so good. will be curious to see if clunking noise also gone.
mike
http://turbo2.shutterfly.com/pictures/13#11
From 251K...will get more at 300K.
picked car up tonight...'new' rotors that were just put on (less than 1k miles ago) were within 'spec' but were respun at Custom Alignment (thx Joe)...mechanic (Bob Grigsby at RMG in Sunnyvale) went well above the call of duty to help sort this out (thx Bob)...and also new tie rods were installed.
drove home...so far so good. will be curious to see if clunking noise also gone.
mike
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#19
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
mikej...seems like combo of rotors off and tie rods...
we'll see...rotors (imo) don't explain the clunking noise w slow turning...?tie rods...not a mechanic
just glad (it seems) fixed.
mike
we'll see...rotors (imo) don't explain the clunking noise w slow turning...?tie rods...not a mechanic
just glad (it seems) fixed.
mike