Replacement for heater tube rubber sleeve
#16
Rennlist Member
Thread Starter
Okay, ended up with the single ply silicone with the wire support. Says for indoor use only, but it's better than what I have on there now. I ordered 5" and 3" sections and will have plenty of extra if it works out.
Highly Compressible Silicone-Coated Fiberglass Duct Hose
* Use with air, paint and weld fumes, and smoke
* Temperature Range: -65° to +550° F
* Flexibility: Very flexible
* Abrasion Resistance: Fair
* Compresses 80% of extended length
* Color: Orange
* Material Meets: Not rated
Made of single-ply silicone-coated fabric, this hose is more compressible and flexible than other silicone-coated duct hose. It has a fabric-enclosed spring steel wire support and a wall thickness of 0.016". Use a worm-drive clamp (pages 238-242) to attach hose. For indoor use only.
Please order hose in 5-ft. increments up to the maximum continuous coil length of 25 ft.
Highly Compressible Silicone-Coated Fiberglass Duct Hose
* Use with air, paint and weld fumes, and smoke
* Temperature Range: -65° to +550° F
* Flexibility: Very flexible
* Abrasion Resistance: Fair
* Compresses 80% of extended length
* Color: Orange
* Material Meets: Not rated
Made of single-ply silicone-coated fabric, this hose is more compressible and flexible than other silicone-coated duct hose. It has a fabric-enclosed spring steel wire support and a wall thickness of 0.016". Use a worm-drive clamp (pages 238-242) to attach hose. For indoor use only.
Please order hose in 5-ft. increments up to the maximum continuous coil length of 25 ft.