Rickard 993 Turbo

I have mesured now

The tread is 120mm from the nut to the rod end

Kevin

Ace those are some good numbers..

ACEparts_com

I've had my 100 cell cats installed in place of the original cells. I'll post some pictures later for future reference

Rickard 993 Turbo

so my numbers are off or do i mesure at the wrong place..?

Kevin

You need to measure from the tip of the threaded rod, (forward toward the actuator pot) to the forward 10mm jamb nut.. Not the nut nearest to the end of the rod, but the one closest to the actuator. You also need to remove the clip to get the measurement.

Rickard 993 Turbo

Thanks Kevin

Will take the car on my lift and check any day then