Small run of Bumperette Delete Inserts available.
#153
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
While I have no intention of ever making a batch again, I have put them up on Shapeways if people want to take a roll of the dice and see if that works.
I've made two variants in different materials and the smooth plastic would seem to less needs finishing but I just can't vouch for any of these. I used to get them printed in SLA but it's difficult to equate to what Shapeways has available.
I'm making these disclaimers here as well on the add for the parts.
https://www.shapeways.com/product/YN...bh-hr-nw-lr-02
I've made two variants in different materials and the smooth plastic would seem to less needs finishing but I just can't vouch for any of these. I used to get them printed in SLA but it's difficult to equate to what Shapeways has available.
I'm making these disclaimers here as well on the add for the parts.
https://www.shapeways.com/product/YN...bh-hr-nw-lr-02
The following 5 users liked this post by gmorat:
911F1 (08-22-2021),
dalves11 (06-28-2023),
LimeyBoy (08-22-2021),
Philipangoo (08-29-2021),
VadGTI (11-12-2021)
#154
Instructor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
@gmorat, thanks for putting them up on Shapeways. My car will be going in for some front end work so I thought this may be the right time to do this. Has anyone tried the Shapeways parts and, if so, how's the quality?
#155
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have a new unused set available for sale from a previous batch if anyone is interested.
#157
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sold.
#159
Rennlist Member
#161
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
They are on Shapeways if people need them but I never used them myself from there or find a set which someone bought but never installed.
G
#164
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
https://www.shapeways.com/product/YN...tion=225256869
I also deleted my headlight washers with some $1 Hillman plugs from Lowe’s. Spray them at the same time.
I also deleted my headlight washers with some $1 Hillman plugs from Lowe’s. Spray them at the same time.
#165
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Brilliant work! So much cleaner than the nasty warts. Really good look on the washer nozzle delete also. Nice to know that the Shapeway bumpertte delete plugs worked out for you. This is really the best way to distribute them as it doesn't matter if one sells in a year or not as there's no money tied up stock that is sitting around for long periods of time.