95_993

Yes, got it with the radio on Tore's site! He just added the stickers a few weeks back

911F1

Installed a turbo bumper I got from Ebay for $300 bucks

BenceJ

^ looks awesome, and great find! i'm surprised i didn't see that same bumper on ebay myself. I've been looking for a while.

sambo32

Great deal on that front bumper, looks nice.

Jlaa

I added a USB port for power. I searched high and low for a rectangular USB port --- circular ones are everywhere, but rectangular ones are super hard to find.

https://www.ocp.com/snap-in-cables/

BradB

Very slick install! I see the usb you ordered has a male end on the cable. How did you hook up the powered end?

Jlaa

Thanks. I used the below that I purchased from eBay - very inexpensive. I tapped from the sunroof switch (its a big 30 amp circuit).

The 12v -> 5v transformer is good for my needs -- it delivers up to 1000mA to my phone.

BradB

Excellent! Thanks for the info. I feel a project coming on!

P-daddy

^Very clean install, Jason

Kika

Replaced fogs with FVD ducts.

Spyder_Man

I visited the R Gruppe meet up at EASY in Emeryville. Then drove down to Parts Heaven and got some bits and pieces for the 993 like a replacement tail light because one cracked.

There was a very nice RS tribute there that got lots of attention. Here are a couple pics:





There were three other 993s there in addition to mine.

Jonttt

Motorraumdämmmattenleiste

Yep I can't say it either :grin:

It is basically a none Standard part fitted to the sound deadening material in the engine bay to make it look a lot tidier.

Of course I had to have a carbon one :roll:

Bought from this guy in Germany...

http://www.kunststofftechnik-buehler.de/

it comes supplied with OEM fitment clips 999.049.011.40 so that it can be fitted in a none intrusive way.....






mmmmm real carbon, not plastic with a film on :hand:






I'll get this fitted over the weekend :thumb:

Edited to show fitted pics...

Its a 5 min job the main level of difficulty is actually getting your fingers in to remove and replace the attachment caps

Old and saggy with heat :nooo:






Here you can see one of the 5 retaining "caps". You just have to use your fingers tips to wiggle it side to side whilst trying to pull away. Some are pretty easy to get at some very tight if you have chunky fingers




An original cap removed on the right and a replacement cap provided which is smaller. The replacement is threaded and has to be screwed onto the lugs ie not just pushed on like the original. This is harder to do with the access restrictions....






And the finished job, remember this part is not original and has been custom designed / made to hide the saggy insulation. Just as Porsche should have made it :thumb:






ps its also available in standard plastic

71-3.0-911

^^ How much does that run? I looked on the link but couldn't find that particular piece, and my German is a little rough.

Leander

But - don't you still have saggy insulation? You just hid it from view, no?

HalfGerman

Link for the exterior parts:http://www.kunststofftechnik-buehler...uid=16&show=20

The prices ( Preise in German) are a pdf download, looks like 95 Euros for black and 115 Euros for Carbon.