Introduction to My 993 RSR Wide Body Build
#49
#51
Drifting
#52
(315/30/18) would be my next size but with the wheel configuration I'm running I'd get quite a bit of rubbing.
Centers are currently off at the powder-coaters and I'm supposed to be getting the lips and inner barrels this Friday.
Centers are currently off at the powder-coaters and I'm supposed to be getting the lips and inner barrels this Friday.
#54
I'll just leave this here for now...
Thanks Fabspeed!
(Still waiting for the bodyshop to get the sunroof panel/ bumpers and my wing painted)...
And the brake calipers.
I also need to have them reshoot the hood as they forgot to fill-in the washer nozzle holes.
Thanks Fabspeed!
(Still waiting for the bodyshop to get the sunroof panel/ bumpers and my wing painted)...
And the brake calipers.
I also need to have them reshoot the hood as they forgot to fill-in the washer nozzle holes.
#55
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Looking good, Jay! The paint looks amazing! We're excited to see your project come together perfectly!
__________________
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
#57
So the car came with a Grey full leather interior... I'll be doing the dash in black Alcantara/ novasuede (better weathering); Eventually going with black carpeting...
I figured the center console was still in decent shape; so why not dye it.
Still not done...Needed to come home to finish up some papers due Sunday at midnight.
However, on a sidenote...
The wheels should be coming together hopefully soon.. A huge thank you to Thatcher Schultz; who was able to locate some ever so hard to find inner barrels.
I figured the center console was still in decent shape; so why not dye it.
Still not done...Needed to come home to finish up some papers due Sunday at midnight.
However, on a sidenote...
The wheels should be coming together hopefully soon.. A huge thank you to Thatcher Schultz; who was able to locate some ever so hard to find inner barrels.
#59
Rennlist Member
Looking good! Can't wait to see it finished.