altered rear
#1
Rennlist Member
Thread Starter
altered rear
finished a few little projects on the back half of my car.
first- modified enginge tray- a little protection when I have it on during the cooler months and in Canada.
new emblem (so I know if the valet has my car or another C2S!)
first- modified enginge tray- a little protection when I have it on during the cooler months and in Canada.
new emblem (so I know if the valet has my car or another C2S!)
#2
Rennlist Member
Thread Starter
after seeing the decal on the spoiler wall thread, and knowing my spoiler wall was in need of replacement, I thought this was a good time to let anyone (everyone) behind me know that their car is a poor substitute.
max
max
Last edited by max911; 07-23-2003 at 08:41 AM.
#4
Rennlist Member
Thread Starter
Bill, have to go on a parts run, details at 11:00
#7
Rennlist Member
Thread Starter
Bill and Jeff- i had the decal (die cut lettering) made for me at a sign shop. (I did the artwork and took them the EPS file). the Porsche crest decal is from Pelican Parts ($2.95).
Chuckie- the '911' badge is from the millenium edition 996. part number is 996 559 237 05.
max
Chuckie- the '911' badge is from the millenium edition 996. part number is 996 559 237 05.
max
Trending Topics
#8
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Love the 911 badge and the undertray. Sorry not too hot on the spoiler wall. Especially the 911 badge is so classy! What material you used for the undertray?
Good stuff!
Good stuff!
#10
Rennlist Member
Thread Starter
Danny- it is the original fiberglass undertray that i slotted using a 3/4" hole saw and jig saw. i used one layer ofaluminum screen (same as window screen) and a layer of aluminum 1/4" mesh. attached with adhesive, rivets with fender washers, and rivets with small washers.
max
max