Round NOT oval tips???
#20
OK, here are a couple of pics I took today.
They are a direct replacement for the originals, so I can always go back.
The outside diameter is 76mm (3") and not too low to scrape too easily.
All up cost was $25 and a fair bit of time (too much really) to get them right.
They are a direct replacement for the originals, so I can always go back.
The outside diameter is 76mm (3") and not too low to scrape too easily.
All up cost was $25 and a fair bit of time (too much really) to get them right.
Last edited by Aussie Alan 993; 11-02-2013 at 11:13 PM.
#26
Ask and you shall receive, seek and you shall find... I found quite a few pics of different types of tips on 993's. I was ready to hit the go button on a pair of rolled edge ovals on eBay but I looked through my pics one more time and decided that round was a bit more unique and needed further investigation.
I made a pair of 85mm od tips out of a cornflakes box, painted the outside silver and the inside black and fixed them on with tape and cardboard packers to see the look for myself, from then they had to be round.
The challenge was to find the best setup, this is the result.
P906, nice car, what is the od of your tips, they look smaller than 3" but that may just be the rolled edge playing tricks on the eye.
I made a pair of 85mm od tips out of a cornflakes box, painted the outside silver and the inside black and fixed them on with tape and cardboard packers to see the look for myself, from then they had to be round.
The challenge was to find the best setup, this is the result.
P906, nice car, what is the od of your tips, they look smaller than 3" but that may just be the rolled edge playing tricks on the eye.
Last edited by Aussie Alan 993; 11-02-2013 at 11:21 PM.