WORK Meister S1 3P
#2
My favorite wheel. Close second is the SSR Professor (Same style).
Have you tried vivid racing? No affiliation, but I've heard good things.
You might also try eBay. A few vendors on there that take orders for custom sizing. Be ready to wait a few months.
Have you tried vivid racing? No affiliation, but I've heard good things.
You might also try eBay. A few vendors on there that take orders for custom sizing. Be ready to wait a few months.
#3
Burning Brakes
Thread Starter
WORK
Ive bought from Vivid a few times already.
After prepaying, I waited 4 weeks,then another two and then asked for my money back. More stories,not this time.
The E-Bay vendors could be worse. Tried to order direct but they dont even call back.
I know I will wait, but my car is in storage till Spring.
After prepaying, I waited 4 weeks,then another two and then asked for my money back. More stories,not this time.
The E-Bay vendors could be worse. Tried to order direct but they dont even call back.
I know I will wait, but my car is in storage till Spring.
#4
Drifting
Super sweet wheels!!
If you're looking for 19s, a friend of mine is selling his set that he ran on a
997.2 C2 Cab for a summer. I'm not sure if they will fit 993 WBs, but worth a try.
Here is a link. (No affiliation with the sale, but thought since you're in QUE, and
he's in Oakville ON, that's close!)
http://www.pcarpower.com/forums/show...&referrerid=52
If you're looking for 19s, a friend of mine is selling his set that he ran on a
997.2 C2 Cab for a summer. I'm not sure if they will fit 993 WBs, but worth a try.
Here is a link. (No affiliation with the sale, but thought since you're in QUE, and
he's in Oakville ON, that's close!)
http://www.pcarpower.com/forums/show...&referrerid=52
#5
These rims are awesome, but i might be biased :P
Wish I could help. But ordered from a local tire place (Singapore), since we are in Asia it was only a 2 month wait. I would wait 6 months if I had to, they are worth it.
Wish I could help. But ordered from a local tire place (Singapore), since we are in Asia it was only a 2 month wait. I would wait 6 months if I had to, they are worth it.
#6
Farfel, i came close to ordering these wheels,the wait was too long though 14weeks the place was called RAVSPEC, the person i spoke with was Mike.
price was $3500
http://www.ravspeconline.com
BTW-i think your speedlines are nicer....
price was $3500
http://www.ravspeconline.com
BTW-i think your speedlines are nicer....
#7
Burning Brakes
Thread Starter
MEISTER
I had two sets of 19in Sport Classic and their replicas from another car I own.
Didnt like the look or the ride either.
Good luck,feel free to contact.
Didnt like the look or the ride either.
Good luck,feel free to contact.
Last edited by Farfelc2s; 01-21-2013 at 10:26 PM. Reason: pic
Trending Topics
#11
Burning Brakes
Thread Starter
WORK
I found a Dealer that can take the order.
To be sure of sizes on my lowered Widebody C2S, dont want extra wide or agressive;
8.0 x 18,et 50
10 x 18, et 40
Would this be right?
To be sure of sizes on my lowered Widebody C2S, dont want extra wide or agressive;
8.0 x 18,et 50
10 x 18, et 40
Would this be right?
Last edited by Farfelc2s; 01-22-2013 at 10:10 PM.
#12
your factory offsets should be:
Hollow Spoke “Technology” wheels:
993.362.136.00 – 18x8 ET52 - 19.95 lb (front)
993.362.140.00 – 18x10 ET40 - 25.13 lb (wide body rear)
using the work offset sheet:
18x8 ET 56 this will push the wheel in towards the body 4mm
18x10 ET 43 this will push the wheel in towards the body 3mm
18x8 ET43 this will bring the wheel out 9mm
18x10 ET30 this will bring the wheel out 10mm
i would go with the second setup, but you have to decide what you are comfortable with, talk to the shop, discuss what your expectations are, they should be able to guide you.
good luck
Hollow Spoke “Technology” wheels:
993.362.136.00 – 18x8 ET52 - 19.95 lb (front)
993.362.140.00 – 18x10 ET40 - 25.13 lb (wide body rear)
using the work offset sheet:
18x8 ET 56 this will push the wheel in towards the body 4mm
18x10 ET 43 this will push the wheel in towards the body 3mm
18x8 ET43 this will bring the wheel out 9mm
18x10 ET30 this will bring the wheel out 10mm
i would go with the second setup, but you have to decide what you are comfortable with, talk to the shop, discuss what your expectations are, they should be able to guide you.
good luck
#13
Three Wheelin'
Keep in mind you have to run O-disks.
Not sure about pushing the front ET to 43, I think the ABS is sensitive to the scrub radius, Bill Verburg will have lots of info on this:-) I am running Rothsport 3mm spacers front & rear on my 964 to get the offsets that I wanted.
Not sure about pushing the front ET to 43, I think the ABS is sensitive to the scrub radius, Bill Verburg will have lots of info on this:-) I am running Rothsport 3mm spacers front & rear on my 964 to get the offsets that I wanted.
#15
Kevin @ 168 Motoring can get it for you.. https://www.facebook.com/168motoring (Prices are pretty decent) and service can't be beat.
I would've gone with the Meister's but that being said, I'm re-barreling my Hartman's when it comes time to do the widebody.
I would've gone with the Meister's but that being said, I'm re-barreling my Hartman's when it comes time to do the widebody.