kandutery

i canīt acces to the web for some days


what happen with these business? i want to buy these products ....



any information about that? itīs still working?

Steve Weiner-Rennsport Systems

Are you referring to Eisenlohr Racing Products?

If so, I can help.

kandutery

Hi Steve.


well, iīm thinking about buy the uniball arms of the rear axle for my 993, and i canīt found the ERP web since the last week

Nollie

Steve is a great resource for getting suspension components, if you give him a call he can assist. Rennline also makes some links. Not sure I've ever seen the ERP site, just Steve (I've worked with) and Stable Energies (I haven't ordered from).

Bill Verburg

Elephant racing has weather sealed monoballs for all the horizontal control arms front and rear
993 monoballs

lopro

nice link bill - your avatar is amazing.

Martin S.

I searched for ERP today, wanted to see what ERP camber plates sell for these days....it seems their domain is available....not a good sign.

If you want ERP, I'd do the following:
1. Check with Steve Weiner
2. Check with Stable Energy, seems to have a good selection
3. Check with Tarrett Engineering in San Diego, they carry ERP
4. Check with Steve Alarcon at Johnson's Alignment in Torrance

Bill Verburg

Thanks, i like the car too

Bill Verburg

Mode sells nice front mono-ball shock tops, they are a copy of the factory RS mounts but w/o the seals, Rennline rear mono-ball shock tops are nice too they are also a copy of Rs and do include the seals, the Elephant horizontal arm sealed mono-***** are hard to beat

Ed Hughes

Just the obvious- ERP is not the same as Elephant Racing.

Steve Weiner-Rennsport Systems

FYI,..Mode is no longer making Porsche stuff.

Steve Weiner-Rennsport Systems

I do stock the ERP camber, toe, and kinematic links if that helps you.

Its the only thing we use on all of our 964/993 race cars.

sonny1

Elephant Racing makes great stuff, and you go directly to the supplier.,can't go wrong with them.

Cary E

This is Cary Eisenlohr from ERP.. You can never go wrong going to Steve, it's basically the same as calling me directly. He is very knowledgeable with not only the product but, how to set it up as well which is a rare find now days. I was in the process of changing servers and apparent that didn't go so well. This happened when I was off to the track and found out the site was basically gone while I was on the road. As many of you may know we are primarily an engineering firm (not the best marketing firm) that have been developing and racing our own parts for more than 30 years now and as a result, it turns out we're at the track more than the office. I apologize for the inconvenience the site being down caused. We have the old one back up and hopefully we'll have the new and improved version up soon to make it easier for you to find what you're looking for.

Thanks Cary