Smurf RSR build
10-01-2016 | 01:58 PM
#274
Thread Starter
Rennlist Member
Joined: Sep 2006
Posts: 7,928
Likes: 534
From: Onterrible
10-04-2016 | 04:19 PM
#278
Thread Starter
Rennlist Member
Joined: Sep 2006
Posts: 7,928
Likes: 534
From: Onterrible
^ Hey Paddy, I know! Pure auditory s*x. Equal length headers by Rothsport and 997 cup muffler. Yum.
Lap time on the clip was about 1:58.1 (hand timing). Certainly capable of risking and increasing corner entry speed in turn 1, 6, 10. And a little less front bar would have helped lower speed turn-in grip on 7, 8, 9. Being picky but there are definitely tenths here and there that would add up. Was rolling easy into 1 because of fuel starvation which you can appreciate if you listen to revs on track out. Did a cool down lap right after and went in for gas.
Lap time on the clip was about 1:58.1 (hand timing). Certainly capable of risking and increasing corner entry speed in turn 1, 6, 10. And a little less front bar would have helped lower speed turn-in grip on 7, 8, 9. Being picky but there are definitely tenths here and there that would add up. Was rolling easy into 1 because of fuel starvation which you can appreciate if you listen to revs on track out. Did a cool down lap right after and went in for gas.
10-04-2016 | 05:27 PM
#279
Rennlist Member
Joined: Jun 2004
Posts: 1,960
Likes: 33
From: Baltimore, Md
Dude, tell me about it. I have the same exhaust setup from Rothsport on my stock 3.6 but it doesn't sound like that! When you're in the cams and slides it's sounds ridiculous, nice droving too 
1:58 is flying, you on Michelin slicks? Last outing this June I cranked out a 2:07 with my setup.
1:58 is flying, you on Michelin slicks? Last outing this June I cranked out a 2:07 with my setup.
