Smurf RSR build
#151
Drifting
#153
Rennlist Member
Join Date: Sep 2008
Location: Flyoverland - Central, Ohio
Posts: 3,213
Received 243 Likes
on
172 Posts
Coming along.... Need to make some final adjustments on the front splitter and back tape the flares.
John (body guy extraordinaire) did a really nice job on tin to bridge the underside of the rockers to the tub. Will take pics of that once it's back up on jackstands.
Have yet to adjust front subframe offset. Motor and tranny are out, so rear ride height is a little bit SUV
John (body guy extraordinaire) did a really nice job on tin to bridge the underside of the rockers to the tub. Will take pics of that once it's back up on jackstands.
Have yet to adjust front subframe offset. Motor and tranny are out, so rear ride height is a little bit SUV
That sledgehammer in the background of the one drivers side photo is ominous.
Great journey!
#154
Rennlist Member
Thread Starter
#155
Rennlist Member
Matt, the body shop you are using would they do work for others or is your project the only one they want to play with?
#156
Rennlist Member
Join Date: Sep 2008
Location: Flyoverland - Central, Ohio
Posts: 3,213
Received 243 Likes
on
172 Posts
#162
Rennlist Member
Thread Starter
Call Michelin and beg
#163
Drifting
Yep, it was red when I bought it as a plain jane C2 in 2006, and there is a thread somewhere in the 993 section when I did the build and changed it to Riviera Blue, full track car. Matt has made further mods that I had planned on doing.
The car has tons of OEM RS and cup parts, 3.8, and then some.
I still blame Bill V. for that project. ;-)
Not bored with 2010 Cup.......yet. Trade? :-)
The car has tons of OEM RS and cup parts, 3.8, and then some.
I still blame Bill V. for that project. ;-)
Not bored with 2010 Cup.......yet. Trade? :-)