JPS

Parking, etc., hear and somewhat feel a click coming from the front. Don't notice at higher. Tracking straight, not pulling, etc.

Thoughts?

os993

What sway bars do you have? Any suspension work recently done?

JPS

RS Sways, few months ago and a couple track events ago had JIC/Cross put on...

Floodj

Are you using camber plates? I would have another shop check the work on your JIC/Cross install. I broke a PSS10 because of a poor install.
--Joe

innovator

Perhaps a sway bar link or the brake pads shifting up and back in the calipers.

Steve Weiner-Rennsport Systems

Might also be the "stick-slip" situation between the springs and the hats or perches.

JPS

Stick slip?

Basal Skull

I think what Steve's referring to is that the springs tend turn a little with some compression, this binds and then turns on the perches. There are needle bearings to try to prevent this (with some effect) that some installers use.
Aftermarket sway bars can often shift in the sway bar mounts that can also cause clunking.