Front Camber Plates Adjustment
#1
Rennlist Member
Thread Starter
Front Camber Plates Adjustment
Previous owner installed FVD camber plates front and rear. I had car corner weighted a few weeks ago and the tech said that he could only get the front to -1.2 left and -1.4 right. Car is set at approximately RS ride height and has PSS9s.
I'd like to get both to at least -1.5, probably more. Track tires (NT-01s) are wearing excessively on the outsides. Read some old posts that indicate you should be able to get to -1.5 without camber plates.
Any ideas or suggestions?
I'd like to get both to at least -1.5, probably more. Track tires (NT-01s) are wearing excessively on the outsides. Read some old posts that indicate you should be able to get to -1.5 without camber plates.
Any ideas or suggestions?