Difference between a manual Carrera 2 and Carrera 4 shift knob/boot?
#31
Are there shifters that raises the height of it? I feel that I need to "reach" for the shifter when its in say 3rd/5th gear. I know a lot of people just switch the entire assembly but I have a C4, which FD doesnt carry.
#33
No interruption at all - thanks for the photo. My Lloyd mats are black with red Porsche lettering... the black/cashmere combination looks great.
#34
http://rothsport-racing.com/Products...et-Shifter.htm
#35
check out this shifter option from Rothsport Racing. (no affaliation, etc)
http://rothsport-racing.com/Products...et-Shifter.htm
http://rothsport-racing.com/Products...et-Shifter.htm
#36
check out this shifter option from Rothsport Racing. (no affaliation, etc)
http://rothsport-racing.com/Products...et-Shifter.htm
http://rothsport-racing.com/Products...et-Shifter.htm
#38
Shifter solution
For those looking to change their C2 shifter w/black insert to the C4/Turbo brushed silver insert look, I found brushed inserts for $39 on the following Rennbush epage. I haven't tried one on a 993, but I did a similar switch on a previous 986 and it looked great and saved me hundreds and took all of about 1 minute. Should find at:
http://www.rennbay.com/968-993-stain...ert-p-103.html
http://www.rennbay.com/968-993-stain...ert-p-103.html
#40
Can I take the metal inner of a 4wd version and swap it into the 2wd version. I just bought the Tequipment version which only comes with the rubber compression fit. My old stock shift **** was weighted and 'felt' nicer as far a driving goes.
#41
#42
I bought mine from Sunset - $512 (yeah, I know, I know. It's a lot for a gear ****) but they told me the 4wd version has been discontinued and the 2wd version is a bit lightweight and chintzy. Bit disappointed with it to be honest.
#45
Hi,
I bought a 993 gear **** advertised as a Turbo but which looks like the Tequipment one (aluminium one) : I literally jumped and went ahead and bought it but then realized too late : will it fit into a 1995 C2? Because I think the gear lever is different between RWD vs AWD (looks beefier on the AWD versions).
Thanks
I bought a 993 gear **** advertised as a Turbo but which looks like the Tequipment one (aluminium one) : I literally jumped and went ahead and bought it but then realized too late : will it fit into a 1995 C2? Because I think the gear lever is different between RWD vs AWD (looks beefier on the AWD versions).
Thanks