Brake Caliper Removal...don't be afraid...
#16
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
For the rear brakes, just be certain the emergency brake is not set...after you have pulled the wheel off and removed the caliper, just observe...you will see a hole for adjusting the emergency brake shoe...I have never touched mine. Just be certain everything is put back just as it was taken off.
I have not done it in a while so my words may not seem so cogent. Just do it; it will all make sense. Besides, most anybody can take anything apart, it's putting it back together where the challenges may be.
I hope this helps a little.
Maybe I'll adjust my emergency brake some day....
I have not done it in a while so my words may not seem so cogent. Just do it; it will all make sense. Besides, most anybody can take anything apart, it's putting it back together where the challenges may be.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Maybe I'll adjust my emergency brake some day....
#17
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
One trick if'n the rotors don't wanna come off hub easily. That's what those threaded holes between the wheel studs are for. Thead an 8 mm bolt in each and work back and forth with tightening them until rotor pops off.
#18
Technical Guru
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It's really, really, really easy to do! And after having done it once, you'll kick yourself for not having tried to adjust it earlier.