Notices
993 Forum 1995-1998
Sponsored by:
Sponsored by:

110,000 miles - Which bushings should I replace?

Thread Tools
 
Search this Thread
 
Old 12-29-2010, 03:21 PM
  #16  
simpsoap
Rennlist Member
 
simpsoap's Avatar
 
Join Date: May 2008
Location: Ohio
Posts: 1,263
Received 13 Likes on 13 Posts
Default

Originally Posted by MrBonus
So the final count:

M030 springs (ROW)
M030 sway bars (front, rear, bushings)
Koni Yellow Sport Shocks (front and rear)
Fresh bump rubber
New dust boots
Wevo semi-solid engine mounts
Front monoball control arm bushings
Fresh rear toe links

RIP money
I'd be curious to know if others have experienced the same thing with the H&R Springs and HDs. That is the current setup I have, and I've experienced zero issues. Grant it, I don't track the car, so maybe that's why this hasn't been an issue for me. When you installed the HD's, what ride height did you set them at?

Andy
Old 12-29-2010, 04:01 PM
  #17  
MrBonus
Three Wheelin'
Thread Starter
 
MrBonus's Avatar
 
Join Date: Sep 2004
Location: Delaware
Posts: 1,796
Received 14 Likes on 6 Posts
Default

Originally Posted by simpsoap
I'd be curious to know if others have experienced the same thing with the H&R Springs and HDs. That is the current setup I have, and I've experienced zero issues. Grant it, I don't track the car, so maybe that's why this hasn't been an issue for me. When you installed the HD's, what ride height did you set them at?

Andy
Andy,

I didn't install them, the previous owner did. I had the spring perches raised as high as they would go when I bought the car. For street driving, the car is largely fine, albeit very stiff. The only thing I didn't like on the street is the way the steering tugs and bump steers.



Quick Reply: 110,000 miles - Which bushings should I replace?



All times are GMT -3. The time now is 10:13 PM.