Interior mods....Carbon, Paint, and other bits...
07-13-2010 | 10:37 AM
#16
Banned
Joined: Jun 2005
Posts: 4,024
Likes: 710
From: NJ but from Boston
07-13-2010 | 12:05 PM
#18
Advanced
Joined: Jul 2009
Posts: 59
Likes: 0
Oh no -- Rich found a closet full of crack. Stop over later -- I just did my windshield with this stuff and it is sweet! Thinking about doing the carpet next.
07-13-2010 | 07:53 PM
#24
Thread Starter
Why do I feel so left out!
Rennlist Member
Rennlist Member
Joined: Sep 2004
Posts: 2,326
Likes: 439
Guys,
Thanks for the vote of confidence!!
The carbon stuff is NOT 3m Carbon wrap. The 3M stuff is a sticky self adhesive film - where as this is actual material.
Its like a material that has had the carbon weave added to it - its pliable and stretchable (but it does distort the weave) but best of all FEEELS like un in-pregnated carbon - you can actually feel the weave!
Will post some more pics shortly.
Simon.
Thanks for the vote of confidence!!
The carbon stuff is NOT 3m Carbon wrap. The 3M stuff is a sticky self adhesive film - where as this is actual material.
Its like a material that has had the carbon weave added to it - its pliable and stretchable (but it does distort the weave) but best of all FEEELS like un in-pregnated carbon - you can actually feel the weave!
Will post some more pics shortly.
Simon.
Last edited by Full Boost; 07-13-2010 at 08:45 PM.
07-13-2010 | 08:41 PM
#25
Thread Starter
Why do I feel so left out!
Rennlist Member
Rennlist Member
Joined: Sep 2004
Posts: 2,326
Likes: 439
Ok,
I got the material from here:
http://www.pyspeed.com/Carbon-Fiber-...-p/rd-8001.htm
I note they sell the vinyl wrap too - there is a discount coupon available as well - so will help witht the cost.
My tip - Buy more than you think you will need - it can be a PITA to work with and get right....
Simon.
I got the material from here:
http://www.pyspeed.com/Carbon-Fiber-...-p/rd-8001.htm
I note they sell the vinyl wrap too - there is a discount coupon available as well - so will help witht the cost.
My tip - Buy more than you think you will need - it can be a PITA to work with and get right....
Simon.
07-13-2010 | 10:33 PM
#27
Thread Starter
Why do I feel so left out!
Rennlist Member
Rennlist Member
Joined: Sep 2004
Posts: 2,326
Likes: 439
Iron - Thanks 
AOW - thanks -- from you - Mr Perfectionist - it means a lot! Thanks for the help with the other thing too
Andy - PM sent.
Haygee - Nah - it was a one owner stock as rock unmolested Twin Turbo - My dream car - i bought it over 6 years ago and.... well..... fell off the cliff with mods...
ROC - thanks - but you now have your hands full with your resto - good fun - been there - and done that 5 + years and one marriage later
Rich - From one sicko to another
Josh - PM incoming! Thanks
Priceless - thank you sir - they are Champion Motorsports RS19.
Sir Prickly one - i think the CW would look good with some Carbon wrap..... DO IT!
Fred - thanks mate!
Simon.
AOW - thanks -- from you - Mr Perfectionist - it means a lot! Thanks for the help with the other thing too
Andy - PM sent.
Haygee - Nah - it was a one owner stock as rock unmolested Twin Turbo - My dream car - i bought it over 6 years ago and.... well..... fell off the cliff with mods...
ROC - thanks - but you now have your hands full with your resto - good fun - been there - and done that 5 + years and one marriage later
Rich - From one sicko to another
Josh - PM incoming! Thanks
Priceless - thank you sir - they are Champion Motorsports RS19.
Sir Prickly one - i think the CW would look good with some Carbon wrap.....
DO IT!Fred - thanks mate!
Simon.
