Calling all batphone console owners
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Would someone be so kind to measure the opening on the batphone console? I am looking for dimensions of a the square hole (i.e. I know it is probably longer up and down but tapers at the bottom)... Any help will be much appreciated!
Regards,
Kevin
Regards,
Kevin
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The panel itself is about 7-5/8" wide x 6-3/4" tall; it starts to taper narrower about 4-1/4" from the top. The actual opening is slightly smaller than those dimensions.
Not sure what you want to put in there, but there's not much depth behind the panel, particularly at the top. See this thread: https://rennlist.com/forums/993-foru...le-x-post.html for some measurements I took of mine, starting at post #15.
Not sure what you want to put in there, but there's not much depth behind the panel, particularly at the top. See this thread: https://rennlist.com/forums/993-foru...le-x-post.html for some measurements I took of mine, starting at post #15.
#7
Race Car
Trending Topics
#8
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member