WTB 993 RS Strut Brace
12-25-2009 | 01:45 AM
#3
Drifting
Joined: Mar 2009
Posts: 2,394
Likes: 3
From: Seattle
Hmmmn, I didn't know there was an RS brace available, looks pretty nice.
Here are a couple other options, just FYI:
http://www.911chips.com/C2strut.htm
http://www.ompracing.it/prodotti.htm...ngelanguage=en
http://www.perfectpowerinc.com/sales.html
Here are a couple other options, just FYI:
http://www.911chips.com/C2strut.htm
http://www.ompracing.it/prodotti.htm...ngelanguage=en
http://www.perfectpowerinc.com/sales.html
12-25-2009 | 03:33 AM
#4
Three Wheelin'
Joined: Nov 2006
Posts: 1,820
Likes: 3
From: Toronto
Vertex: http://www.vertexauto.com/showitem.a...Carbon%20Fiber
Great product and it hides under the carpet.
Great product and it hides under the carpet.
Trending Topics
12-25-2009 | 11:43 PM
#10
Race Car
Joined: Sep 2003
Posts: 3,928
Likes: 3
Mine: http://www.klaindustries.net/
Go to products and then 993 strut brace. Plenty of pictures and very reasonably priced. It also hides under the carpet.
Go to products and then 993 strut brace. Plenty of pictures and very reasonably priced. It also hides under the carpet.
12-26-2009 | 12:11 PM
#13
Drifting
Joined: Aug 2006
Posts: 2,733
Likes: 3
From: South Bay, Los Angeles
Just to clarify, I believe that "Porsche" "factory" "OEM" and "RS" are all the same part.
I believe I got the "last" one Sunset had at the "old" exchange rate which meant $275 to me. They're not great with e-mail, but super friendly on the phone. Open 'till 1:00 PST Saturdays (maybe even today?)
Steve Weiner should also have a few.
BTW- The factory RS part is not an "under carpet" bar. Looks best with a small slit on each side of the carpet, then tucked and snapped under the bar.
I believe I got the "last" one Sunset had at the "old" exchange rate which meant $275 to me. They're not great with e-mail, but super friendly on the phone. Open 'till 1:00 PST Saturdays (maybe even today?)
Steve Weiner should also have a few.
BTW- The factory RS part is not an "under carpet" bar. Looks best with a small slit on each side of the carpet, then tucked and snapped under the bar.
12-26-2009 | 01:11 PM
#14
Race Car
Joined: Aug 2003
Posts: 3,599
Likes: 3
From: Alabama
. It is a tight fit. I think the Perfect Power bar may even be a slightly (theoretically?) better piece, though any of them will likely be fine. Also look into the factory GT2 non adjustable piece. They were made by Matter, but I think Racing Dynamics makes one now. Be aware that it may be tough to fit due to slight distortion in mounting points. Also it would be best to have alignment checked after proper preloading of the brace (this is probably nitpicking).
12-26-2009 | 01:50 PM
#15
Rennlist Member
Joined: Sep 2005
Posts: 6,962
Likes: 3
From: Still here...
Just to clarify, I believe that "Porsche" "factory" "OEM" and "RS" are all the same part.
I believe I got the "last" one Sunset had at the "old" exchange rate which meant $275 to me. They're not great with e-mail, but super friendly on the phone. Open 'till 1:00 PST Saturdays (maybe even today?)
Steve Weiner should also have a few.
BTW- The factory RS part is not an "under carpet" bar. Looks best with a small slit on each side of the carpet, then tucked and snapped under the bar.
I believe I got the "last" one Sunset had at the "old" exchange rate which meant $275 to me. They're not great with e-mail, but super friendly on the phone. Open 'till 1:00 PST Saturdays (maybe even today?)
Steve Weiner should also have a few.
BTW- The factory RS part is not an "under carpet" bar. Looks best with a small slit on each side of the carpet, then tucked and snapped under the bar.
you got a deal on that one at $275! We ordered a couple anyhow. Still a pretty cool RS bit