RS Parts Advice
#32
a n/b 993 wants 8" 50-52ET front and 10" 65ET rear, there is a small amount of wiggle room which decreases as the car is lowered,
Wider wheels will require different o/s and setup
#33
Rennlist Member
Get in touch with Gert Carnewal www.carnewal.com. He can sell you!
RS front splitters in polyurethane
RS side skirts in polyurethane (Only source at the present time)
:
RS front splitters in polyurethane
RS side skirts in polyurethane (Only source at the present time)
:
watch this space for more info from a So. Cal. source.
Craig
#35
Rennlist Member
+1. Speedline Alesio are (I think) ET56 in rear. But as my pic above and avatar shows, they can fit n/b 993 even down near RS ride height. But I had to roll the fender and stick with 265 tires (which is spec size anyway) and run -2 deg camber. Right at the limit.
#36
Racer
Thread Starter
dang stupid offsets, I cant justify spending 3k with out knowing it will fit. wonder why they never did replica RS wheels like they did for the TT, my02, GT3, etc... I guess demand wasnt too high.
#37
Rennlist Member