SRP Racing Pedals - As low as $64
04-23-2009, 05:23 PM
#32
Former Vendor
Thread Starter
Join Date: Feb 2009
Location: Concord, NC
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
The picture below and my description should help. You do have to drill holes to mount. The brake and clutch mount with machine screws and lock nuts. The gas pedal mounts with self tapping type screws. You can take the rubber off the brake and clutch or leave it on (I take it off personally). Once installed there is no chance of them coming off.
Hopefully this helps.
Brian
Hopefully this helps.
Brian
04-23-2009, 05:29 PM
#33
Former Vendor
Thread Starter
Join Date: Feb 2009
Location: Concord, NC
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
Many years ago, experimenting in the ricer market, I actually made some that said "GO" on the gas, "STOP" on the brake and "SHIFT" on the clutch. I never really tried to sell them, just a little too ricey for my taste.
Brian
04-23-2009, 06:05 PM
#34
Three Wheelin'
This color idea might be a little outrageous for most people.
Many years ago, experimenting in the ricer market, I actually made some that said "GO" on the gas, "STOP" on the brake and "SHIFT" on the clutch. I never really tried to sell them, just a little too ricey for my taste.
Brian
Many years ago, experimenting in the ricer market, I actually made some that said "GO" on the gas, "STOP" on the brake and "SHIFT" on the clutch. I never really tried to sell them, just a little too ricey for my taste.
Brian
04-23-2009, 06:35 PM
#35
Drifting
This color idea might be a little outrageous for most people.
Many years ago, experimenting in the ricer market, I actually made some that said "GO" on the gas, "STOP" on the brake and "SHIFT" on the clutch. I never really tried to sell them, just a little too ricey for my taste.
Brian
Many years ago, experimenting in the ricer market, I actually made some that said "GO" on the gas, "STOP" on the brake and "SHIFT" on the clutch. I never really tried to sell them, just a little too ricey for my taste.
Brian
These would be hilarious. Green powder coat for the gas pedal, red for the stoppie pedal, not sure for the clutch... How about an extra pedal for the passenger? The "Oh Sh*t" pedal....in brown of course!
04-23-2009, 09:23 PM
#36
Burning Brakes
Nice.
Oh, but the extention for heel and toe on the gas pedal would be red, since it's used in conjunction with the brake pedal.
06-07-2009, 05:08 PM
#41
Former Vendor
Thread Starter
Join Date: Feb 2009
Location: Concord, NC
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
Here are a few pictures of an idea I have for changing up the Grid pedals a little. Our standard Grid is on the left and the concept is on the right. The ring around the edge might make the pedal look a little "classier" or refined. Let me know what you think.
06-07-2009, 08:55 PM
#43
Former Vendor
Thread Starter
Join Date: Feb 2009
Location: Concord, NC
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
Here is the pedal area from a 964. Does the 993 pedal area look like this? The following pictures are of a 964 footrest I just completed. I could sell this seperate, but would need to confirm fitment on a 993. I haven't set a price yet, will try to get it figured out in the next couple days.
Brian
Brian
