new member questions!
02-10-2009, 12:22 AM
#1
Racer
Thread Starter
Join Date: Jan 2009
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
new member questions!
new member here of a 95 C2 black metallic/grey, hello everyone. i will upload pic first thing 2m.
i had a question on wheel fitment.
the car came with some 5 spoke antera wheels, they look like they might be turbo fitment due to the wheel and 285 tire poking out a tad bit at the rear.
i just purchased turbo fitment oz racing/techart wheels tonight. will they fit the same? or will i need to make fender mods.
all stock suspension
i had a question on wheel fitment.
the car came with some 5 spoke antera wheels, they look like they might be turbo fitment due to the wheel and 285 tire poking out a tad bit at the rear.
i just purchased turbo fitment oz racing/techart wheels tonight. will they fit the same? or will i need to make fender mods.
all stock suspension
02-10-2009, 04:08 AM
#2
Instructor
Join Date: Feb 2008
Location: Vancouver, Canada
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the site. This is the place to be for 993.
I am not an expert on wheels but I know the correct offset for a narrow body is 65. You can go down to a 55 and maybe a 52 but it depends on how low your car is sitting.
Try a search on wheels and you will find a lot of info.
I am not an expert on wheels but I know the correct offset for a narrow body is 65. You can go down to a 55 and maybe a 52 but it depends on how low your car is sitting.
Try a search on wheels and you will find a lot of info.
02-10-2009, 12:59 PM
#3
Yeah, you might be in for a surprise with the new wheels. I think "typical" Turbo offsets are 45mm which do not typically fit narrow body cars. If the car is stock ride height, you might get by, but I think most on this board would not advise it!