FS: Last of 993 Tid Bits to go
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
FS: Last of 993 Tid Bits to go
Guys,
Following is the last of the 993 stuff that I am going to get out of the garage one way or another. First PM gets it and the prices include shipping within the continental 48 states:
1. Carnewal front protection bar - never opened - $75 - SOLD
2. OEM Porsche car cover - used for a 1 week duration while the car was sitting outside waiting to be shipped. It is for a wide body w/out rear spoiler, but I'm sure it would fit narrow body too. - $75 - SOLD
3. Pagid Blacks - size is for the Big Red rears or Stock caliper fronts - I have 1 set brand new and 1 set with 75% life left. - $250 or make an offer
4. Bird Arm Rest - Classic Grey - it has a small tear on the bottom - where the drivers seat belt recepticle rubbed against it - I'm sure it can be easily and cheaply recovered - $200 or make an offer - Pending
5. Parts sold as a set only - 2 small oil filters, 1 large oil filter, 4 crush washers, 2 polen filters, 1 air filter - $50 - SOLD
6. 1 set of 4 locking wheel nuts (OEM) - $30 - SOLD
7. New - Autometrics rear tow hook and jacking point - $50 - SOLD
I think that will be it for the 993 stuff.
Thanks,
-SKip
Following is the last of the 993 stuff that I am going to get out of the garage one way or another. First PM gets it and the prices include shipping within the continental 48 states:
1. Carnewal front protection bar - never opened - $75 - SOLD
2. OEM Porsche car cover - used for a 1 week duration while the car was sitting outside waiting to be shipped. It is for a wide body w/out rear spoiler, but I'm sure it would fit narrow body too. - $75 - SOLD
3. Pagid Blacks - size is for the Big Red rears or Stock caliper fronts - I have 1 set brand new and 1 set with 75% life left. - $250 or make an offer
4. Bird Arm Rest - Classic Grey - it has a small tear on the bottom - where the drivers seat belt recepticle rubbed against it - I'm sure it can be easily and cheaply recovered - $200 or make an offer - Pending
5. Parts sold as a set only - 2 small oil filters, 1 large oil filter, 4 crush washers, 2 polen filters, 1 air filter - $50 - SOLD
6. 1 set of 4 locking wheel nuts (OEM) - $30 - SOLD
7. New - Autometrics rear tow hook and jacking point - $50 - SOLD
I think that will be it for the 993 stuff.
Thanks,
-SKip
Last edited by swftiii; 03-11-2008 at 05:56 PM.
#3
Drifting
I will take the filters
mar
mar
Guys,
Following is the last of the 993 stuff that I am going to get out of the garage one way or another. First PM gets it and the prices include shipping within the continental 48 states:
1. Carnewal front protection bar - never opened - $75
2. OEM Porsche car cover - used for a 1 week duration while the car was sitting outside waiting to be shipped. It is for a wide body w/out rear spoiler, but I'm sure it would fit narrow body too. - $75
3. Pagid Blacks - size is for the Big Red rears or Stock caliper fronts - I have 1 set brand new and 1 set with 75% life left. - $250
4. Bird Arm Rest - Classic Grey - it has a small tear on the bottom - where the drivers seat belt recepticle rubbed against it - I'm sure it can be easily and cheaply recovered - $200
5. Parts sold as a set only - 2 small oil filters, 1 large oil filter, 4 crush washers, 2 polen filters, 1 air filter - $50
6. 1 set of 4 locking wheel nuts (OEM) - $30
I think that will be it for the 993 stuff.
Thanks,
-SKip
Following is the last of the 993 stuff that I am going to get out of the garage one way or another. First PM gets it and the prices include shipping within the continental 48 states:
1. Carnewal front protection bar - never opened - $75
2. OEM Porsche car cover - used for a 1 week duration while the car was sitting outside waiting to be shipped. It is for a wide body w/out rear spoiler, but I'm sure it would fit narrow body too. - $75
3. Pagid Blacks - size is for the Big Red rears or Stock caliper fronts - I have 1 set brand new and 1 set with 75% life left. - $250
4. Bird Arm Rest - Classic Grey - it has a small tear on the bottom - where the drivers seat belt recepticle rubbed against it - I'm sure it can be easily and cheaply recovered - $200
5. Parts sold as a set only - 2 small oil filters, 1 large oil filter, 4 crush washers, 2 polen filters, 1 air filter - $50
6. 1 set of 4 locking wheel nuts (OEM) - $30
I think that will be it for the 993 stuff.
Thanks,
-SKip
Trending Topics
#11
Guru
Lifetime Rennlist
Member
Rennlist Small
Business Sponsor
Lifetime Rennlist
Member
Rennlist Small
Business Sponsor
The jacking block will fit the 96 and up 993. The 993 turbo is a bit different as it needs to be a bit longer. Here is an image demonstrating this difference -- FYI
#12
Rennlist Member
Darn it! I've been wanting one of those for ever! Too busy searching the web for a replacement wheel (see my thread); should have clicked on this thread earlier!
Mike J, this seems to be your week! Lifetime membership, this beautiful jacking block... Christmas in March?
swftiii, if everyone else backs out, I'll take the jacking block.
Mike J, this seems to be your week! Lifetime membership, this beautiful jacking block... Christmas in March?
swftiii, if everyone else backs out, I'll take the jacking block.
#14
Chris - Hmmm...interesting...I had always thought that the NA one would also fit TT as well! So the next question is - "When are you going to make one that fits?!?!"
#15
Guru
Lifetime Rennlist
Member
Rennlist Small
Business Sponsor
Lifetime Rennlist
Member
Rennlist Small
Business Sponsor