Black993

Anyone have any good shops to refinish wheels? I picked up a set of MY02 5 spokes that have some rash on them and have no idea where to take them in the Central Florida area that is reputable. Never had to refinish a wheel.

Any advice is greatly appreciated

brakinglate

second that...Im in Orlando and have a similar challenge ....

Black993

Please keep me informed of what you find, and I'll be sure to do the same

Howdy993

Try doing a search.

95FL993CAB

Try this person. They have done work on my wife's MB a few years ago and I was satisfied.
ALLOY WHEEL REPAIR
John Martin 407 733 9521
www.mobilewheelrepair.com
Good luck
Ron

FLA997

Huh....so there ARE more than 3 993s in Orlando (myself, Ron and pcar964). Nice to know.... ;-)

clubrcr

Would be willing to do the work yourself. There is a good DIY thread on:

http://www.autopia-carcare.com/realwhda.html

Black993

I'm close, over towards daytona though

mbb993

Justin,

Here are two restoration shops in Florida. I have not used them myself but they were recommended to me by very reliable sources.

TransWheel

Wheel Medic

Black993

seriously thinking of the DIY method. Think I'll try on the cheap knock-off's that are on the car now as they also have some curb rash. Has anyone done the DIY way yet?

Black993

so every place that seems to carry Wurth products is out of the silver wheel paint. Anybody know where I can purchase some?

brakinglate

Ok ...Just had my wheel done at Orlando Porsche.....hes a mobile guy who goes in every wednesday, you just ring the dealership.

I didnt get to meet him but it was a very nice job, I also got a dent guy to take to micro dents out of another car....same deal.

Hope that helps

Now any ideas on an interior refurbishment detailer specialist ?????

95FL993CAB

what did the stealer charge you per wheel? Did they take the wheels off of fix them on the car?
Ron

srf506

I was about ready to post that Porsche of Orlando had a guy who does them right at the dealership. My SO has been wanting to get her 996TT wheels done and had talked to them about doing it. Glad to hear they did a good job.

Black993

what was the cost involved at the dealer in Orlando if you dont mind me asking? I have some minor curb rash and a few scratches on the new wheels but nothing major by any means.

I've already ordered the stuff to do it myself but am admittedly a bit nervous about it