Robert Collins - 96 993TT

Sorry for the delayed response. I actually had to go look because mine has held up so well I haven't pulled it out in three years.

The name of the tape is 3M heavy duty indoor/outdoor mounting tape. It's very thin and the tape itself is actually black (the paper it's mounted to is white though, so look carefully). It comes in a red package, with a photo of a perosn mounting an address placard on their house.

I bought 2-3 double sided tapes but after trying the stickier, heavier and thicker ones on one piece, I ditched them in favor of the ultra thin one as the CF weighs nothing anyway. Keep in mind some of the pieces like the one behind the gauges needs no tape as the gauges hold it in and the ones that insert on each side of the steering wheel for the dash only need tape on other spots, as they are also held in place at the end next to the steering wheel.

PullSomeGs

Shifter 5 / 6 course $ 122 90 964/993
Hand brake handle $ 95 70 € 964/993
Handbrake bath $ 189 140 € 964/993
Storage tray instead Casettenfach $ 189 140 € 964/993
Cassette Tray $ 230 170 € 964/993
Center console switch visors, 2-piece $ 257 190 € 964/993
Instrument panel $ 230 170 € 911/964/993
Panel Bar 5tlg $ 540 400 € 964/993
Zündschloßrosette $ 61 45 € 911/964/993
Türschloßrosetten L / R 911/964 $ 108 80 €
Triangular panels facia outside 2L / 2R $ 122 90 € 911/964/993
Cover Diagnosedose $ 54 40 € 964
Scuff plates L / R $ 257 190 € 911/964/993
Scuff plates L / R with lettering of your choice $ 304 225 € 911/964/993
Strike L / R $ 216 160 € 911/964/993
Strike L / R with lettering of your choice $ 263 195 € 911/964/993
Ala RS door panels without handles and straps $ 810 600 € 911/964/993
Rosettes for handles and straps 6 pc $ 162 120 € 911/964/993
Defrosterblende in exchange for $ 607 450 € 964/993
Innenspiegelcover $ 122 90 € 964/993
Kofferraumwanne spare $ 300 220 instead of € 964/993
Cover pan for $ 108 80 €
Engine compartment fuse box cover $ 257 190 € 964/993

Exterior

Coated with carbon Cupspiegel $ 810 600 € 964/993
in exchange for $ 540 400 €
Fuel cap cover $ 122 90 € 911/964/993
964 GT front lip with lateral wings GFK $ 742 550 € 964/965
Visible carbon $ 1214 900 € 964/965
1750 grams of engine covers $ 877 650 € 964/993
Carbon perspective with clear lacquer $ 1618 1.200 € 964/993
Fiberglass trunk lid 6.5 kilograms $ 877 650 € 964
Carbon 5kg $ 1215 900 € 964
Visible carbon clearcoat with approximately 5.8 kilograms $ 1618 1,200 € 964
Transmission tunnel cover $ 189 140 € 964/993
Fuel pump cover $ 108 80 € 964/993



Engine Parts

Set heater tube 250 € 964/993
Airbox 2tlg 650 € 964
Long stacks of 964 CSF 150 € 964
Visible carbon 275 € 964
Lüfterradblende 110 € 964
Engine compartment fuse box with a lid 400 € 964/993
Only the fuse box lid for 140 €

Robert Collins - 96 993TT

Thanks Chuck. I have really enjoyed it alot and receive compliments on it from anyone who rides in it during the day.

Robert Collins - 96 993TT

Here is a picture of the tape I used. I used it because it is strong (made for outdoor use), black so it won't show and thing so it doesn't push the CF off the mounting surface very much.

Hope this helps.

Marc Shaw

FWIW, I bought real (not decorative) RS carbon fibre door panels from FVD but, since they actually weighed MORE than the vinyl ones from AppBiz (and I wanted more weight reduction than bling), I stuck with the AppBiz ones.

Marc

amrkaki

I got the parts to replace them instead of the wood interior faced to many problems , I had to order the plain trims to put them on top of them , another issue is that the door inserts can't be hold to the door

amrkaki

dear Robert am replacing 1995 door panel inserts from wood to carbon , problem am facing is the wood has please for screws however the carbon I got from Marcus doesn't have what kind of glue I may use , I tried gun glue it hold at the beginning when it's dry it went off[

wilson.c

I recently got a set of the interior trim from Marcus, the parts met my already high expectations from all the praise on this board. I'm trying a thinner 3M adhesive tape to see if it's good for mounting. However I did ask Marcus what he used for the adhesive, it was INNOTEC TOPFIX see WWW.INNOTEC-WORLD.COM . It's a two part adhesive from what I can gather, but unfortunately I cannot find it locally here.

ptam

Does anyone know if Marcus is still selling these carbon pieces? I sent an email to him but no reply.

hapkido2

here is his website: http://www.kunststofftechnik-buehler.de/

ptam

Thank You. Will see if I can contact him thru the web site.

911PERVY

Gee that website had me worried..............