"S" or Turbo front Spoiler on NB
#1
Racer
Thread Starter
Join Date: Jun 2006
Location: Bay Area, Ca
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Can this be done? Anyone have any pics? Thinking about swapping out front bodywork on my "NarrowB" for better looking front spoiler of "S" or Turbo.
#2
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Chuck, a bunch of folks here have upgraded nb fronts to tt fronts. They fit easily. I think you need to change the fender liners though. Do a search, there's a load of photos you'll find.
#3
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here is the turbo nose on my 97 NB. Also has the lower splitters. No other work was needed. Got it from Gert, but Viper Bob should have at perhaps a better price these days.
#5
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Mike J
I could not fine a definitive answer forthis...can you combine a Turbo bumper cover and the RS splitters?
Cheers,
Mike
Cheers,
Mike
#6
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by jdistefa
Nope, it's one or the other Mike.
Cheers,
Mike
#7
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just had my Euro Bumper Cover installed. I left the original wheel liners in place, they are approximately 1/2 inch to 3/4 inch too short. I don't drive this car in the rain anyway and the folks at the body shop said it will not hurt anything. Everything fastened up and fit perfectly otherwise.
Trending Topics
#8
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Front liners are $45 each, plus another $10 for the additional weather stripping. Call it $120 all up, including shipping. If it's worth doing, it's worth doing right. IMHO, of course.
#9
Rennlist Member
![Smile](https://rennlist.com/forums/images/icons/icon7.gif)
Easy swap over and just have your bodyshop fabricate a couple of brakets for where the turbo nose is slightly wider at the bottom compared to the "narrow body" nose.
Cheers,
David
Cheers,
David