Anyone ever "Fix" the floor board in trunk?
#6
Seared
Rennlist Member
Rennlist Member
I just replaced mine the other week. The warped factory 'board' was some sort of thin pressboard. It was shot.
I picked up a 2'x4' piece of 1/4" MDF at Home Depot, and then ran it through my table saw to get the correct dimensions (somewhere around 13"x23" if I remember correctly). I finish-sanded the edges and then brushed on a few coats of satin polyurethane. The end result turned out great and fit snuggly into the pocket. It actually feels like a fairly-solid floorboard now
Andreas
I picked up a 2'x4' piece of 1/4" MDF at Home Depot, and then ran it through my table saw to get the correct dimensions (somewhere around 13"x23" if I remember correctly). I finish-sanded the edges and then brushed on a few coats of satin polyurethane. The end result turned out great and fit snuggly into the pocket. It actually feels like a fairly-solid floorboard now
Andreas