Gert FPB question
07-06-2006, 03:32 PM
#1
Rennlist Member
Thread Starter
Gert FPB question
I noticed when gordo993 helped me install my FPB that it seemed to be at a slight angle, with the right side slightly lower. I attributed that to installing when the car was not raised - and was planning, when installing the exhaust on working on trying to screw the right side in better to get it even.
Then I saw CP's (Pong?) on the "Random Picture" thread and it looks to have the same issue.
[Permission requested to repost this image - I will remove it immediately if requested.]
Anyone else notice this on their cars?
Any fixes?
Then I saw CP's (Pong?) on the "Random Picture" thread and it looks to have the same issue.
[Permission requested to repost this image - I will remove it immediately if requested.]
Anyone else notice this on their cars?
Any fixes?
07-06-2006, 04:42 PM
#4
Did you use a washer on one side but not the other? Did one side catch in the backing but not the other?
mine is striaght, the black paint makes it hard to see, i also have the RS chin pieces on either side.
mine is striaght, the black paint makes it hard to see, i also have the RS chin pieces on either side.
07-06-2006, 05:05 PM
#5
Burning Brakes
I used the supplied washers on both sides, however the pass side was pretty difficult to get threaded. We did notice some scraping damage under there while installing, so we attributed our difficulty to minor tire well damage.
07-06-2006, 05:41 PM
#6
Rennlist Member
For top quality work near you call Perfect Power. I used them before and they are great.
Perfect Power Inc.
844 Liberty Drive
Libertyville, IL 60048
Telephone: (847) 367-8837
E-mail: perfectpower@sbcglobal.net
Perfect Power Inc.
844 Liberty Drive
Libertyville, IL 60048
Telephone: (847) 367-8837
E-mail: perfectpower@sbcglobal.net
Trending Topics
07-07-2006, 03:14 AM
#8
Drifting
Join Date: Apr 2003
Location: la la land | comin' back soon nyc
Posts: 3,351
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by Bill Verburg
Did you use a washer on one side but not the other? Did one side catch in the backing but not the other?
mine is striaght, the black paint makes it hard to see, i also have the RS chin pieces on either side.
mine is striaght, the black paint makes it hard to see, i also have the RS chin pieces on either side.
ok... back on topic.
most i've seen have been straight... i just don't like the way gert's look peeking under esp. w/ a black car. i'd do one if they came in a dark metal, until then i'll live dangerous.
hey bill... where did you get a black one??? -damn
07-07-2006, 10:36 AM
#11
Lifetime Rennlist
Member
Originally Posted by STLPCA
Libertyville is near Chi, not St. Louis (unless you consider 300+ miles near).
07-07-2006, 05:46 PM
#15
Lifetime Rennlist
Member
Originally Posted by 24FPS
bill you're smarter than dan & the chimp... & me for that matter.
thx
thxThat has to be pretty smart... after all, Dan is a guru -- it says so in his avatar. But that chimp is really smart. He's the guru for gurus. The Dali Lama of Rennlist, if you will.