1995 OBD1 Diag tool
#152
#156
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi guys, is the Scantool software and 993 config file still available? if so could I please have a copy?
leeshephard@gmail.com
cheers :-)
leeshephard@gmail.com
cheers :-)
#157
AutoX
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So would i please!
I am currently trying to troubbleshoot the fans and it would be great to see if the code is still triggered.
Thankns to this wonderful Porscheoholic page i have so far found out that the relay for the heater fan in the back and the low speed resistor on the AC fan is are broken and needs to be replaced.
Putting together the electrics wont be a problem if i have the appropriate software to go with it. I like cables more than compilators and programming.
Thanks in advance!
Mattias mattias@hlo.se
993 C2 -94
I am currently trying to troubbleshoot the fans and it would be great to see if the code is still triggered.
Thankns to this wonderful Porscheoholic page i have so far found out that the relay for the heater fan in the back and the low speed resistor on the AC fan is are broken and needs to be replaced.
Putting together the electrics wont be a problem if i have the appropriate software to go with it. I like cables more than compilators and programming.
Thanks in advance!
Mattias mattias@hlo.se
993 C2 -94
#158
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
http://forums.rennlist.com/rennforum...d.php?t=294027
That should be the thread with software and all other info in first message.
Ray
That should be the thread with software and all other info in first message.
Ray
#160
AutoX
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Think the link got cut for some reason.
Here is it again.
https://rennlist.com/forums/993-forum/294027-diy-1995-obd-1-scantool.html
Here is it again.
https://rennlist.com/forums/993-forum/294027-diy-1995-obd-1-scantool.html
#161
![Question](https://rennlist.com/forums/images/icons/icon5.gif)
Hi all.
Any idea what address and baudrate to setup in the scantool.cfg file when connecting to the Tiptronic control unit of our 993?
PDriver
Any idea what address and baudrate to setup in the scantool.cfg file when connecting to the Tiptronic control unit of our 993?
PDriver
![Cool](https://rennlist.com/forums/images/smilies/cool.gif)