Who has coolest wheels on their 993?
#2941
Instructor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks.
The car is approximately 10mm below ROW height based on rough measurements underneath the car.
I have between 1/2 finger gap in the front and 1 finger gap in the rear between the tire and fender.
I’m running M030 springs with Bilstein B6 HDs. There’s 1 inch left of thread on the shock bodies to go lower.
The car is approximately 10mm below ROW height based on rough measurements underneath the car.
I have between 1/2 finger gap in the front and 1 finger gap in the rear between the tire and fender.
I’m running M030 springs with Bilstein B6 HDs. There’s 1 inch left of thread on the shock bodies to go lower.
#2942
Instructor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What exactly did you have to do to the fenders to make this work?
The following 2 users liked this post by racer959:
TheFatArmadillo (12-31-2022),
Toastypie (01-01-2023)
The following 6 users liked this post by Coleman:
AX993 (01-03-2023),
boomboomthump (01-02-2023),
dalves11 (01-02-2023),
Gator06 (01-02-2023),
max911 (01-03-2023),
and 1 others liked this post.
#2945
Addicted Specialist
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Wow, that is beautiful, man!!! Like retro-modern, sporty and utilitarian! Love the look; well done!
Fwiw, I've always maintained that wheels/tires that "fit" the car are far more important than what size, and yours reinforces this. As one who proudly wears his original 17" Cup II, I applaud you!![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
Edward
Fwiw, I've always maintained that wheels/tires that "fit" the car are far more important than what size, and yours reinforces this. As one who proudly wears his original 17" Cup II, I applaud you!
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
Edward
Last edited by Edward; 01-02-2023 at 11:57 AM.
The following 2 users liked this post by Edward:
boomboomthump (01-02-2023),
Coleman (01-30-2023)
#2947
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](https://cimg8.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/3109aa72_5c16_4f96_a986_fed498869cd5_38999039a8759f023302653aed4e04405a6905b8.jpeg)
Happy 2023 everyone.
It’s been 5 years since switching from Brombachers to Tramonts.
The deep dished Tramonts still complete the look on the C2S for me, even though Brombachers were noticeably better to drive on.
The following 17 users liked this post by wongdawg:
Andreas. (05-25-2024),
anguilla1980 (01-02-2023),
boomboomthump (01-03-2023),
By-Tor (06-25-2023),
ClassicAndy (01-06-2023),
and 12 others liked this post.
#2948
Racer
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Gorgeous!!!!
#2949
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks, they are stock Porsche 16" rims from a 97-04 Boxter. 986 Boxster Wheels 6x16 ET50 & 7x16 ET40 99636211200 99636211400
I do have to run a small spacer in the front to help clear the caliper..
Front: 205/55R-16 MICHELIN X-ICE SNOW XL Rear: 215/55R-16 MICHELIN X-ICE SNOW XL
I had them powder coated black to deal with the salt and stuff out here-
I have another set, in silver- with Blizzaks - PM me if interested-
The following 5 users liked this post by Longhood72:
Coleman (01-04-2023),
Holger3.2 (05-25-2024),
silverlock (01-04-2023),
Toastypie (01-04-2023),
Tyler85 (01-05-2023)
#2951
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks!
#2952
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I used a 5mm aluminum spacer, something like
but tolerancing between the caliper top and the inside rim lip is pretty close (as you can see in my photo) -But after a few seasons and different snows, I never had a issue...
If I were to do it again, I'd probably opt for a 7 mm.. The back wheels clear with no interference. And no spacers needed....
If I were to do it again, I'd probably opt for a 7 mm.. The back wheels clear with no interference. And no spacers needed....
The following users liked this post:
orangecurry (01-04-2023)
#2953
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
To be honest if I do get some 16s, I'd probably choose some D90s in 7 and 8, but it's great to know what actually works on a 993.
The following 3 users liked this post by JimVee:
#2955
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)