Will Big Reds fit my non-widebody?
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Before I get flamethrower rash for not using the search, let me clarify. My 18" Carrera 5 spoke wheels just fit with about a paint coat's width from rubbing my stock 993 C2 non-widebody, black calipers. So I'm just casually thinking about picking up a set of Big Reds, but don't want to get into endless modifications to make them fit.
I think I need spacers to make the bigger calipers mount to the wheel, correct? Then, are Big Reds any thicker, meaning in distance from rotor surface to the "PORSCHE" painted logo, than my stock calipers? If they are so much as a hair thicker than my stock calipers, I don't think they'll fit without getting hit by my wheels. So would I need wheel spacers then too?
I think I need spacers to make the bigger calipers mount to the wheel, correct? Then, are Big Reds any thicker, meaning in distance from rotor surface to the "PORSCHE" painted logo, than my stock calipers? If they are so much as a hair thicker than my stock calipers, I don't think they'll fit without getting hit by my wheels. So would I need wheel spacers then too?
#4
Addict
Rennlist Member
Rennlist Member
Join Date: Jun 2003
Location: Orange County, CA
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
They will fit no problem. I think since they are slightly farther from the center, the spokes come out a little. They are not even close to rubbing.
Here's how they look on my car!
I couldn't resist!
Best of Luck!
Here's how they look on my car!
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![](http://forums.rennlist.com/upload/img_1126cropsm.jpg)
I couldn't resist!
Best of Luck!
#6
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Big Reds are only bigger in the radial direction by ~10mm than 993 calipers. As Randy pointed out they sit further away from the axle where there is generally a bit more room.
Their advantage comes from the 322mm rotors vs. 304mm stock.
Their advantage comes from the 322mm rotors vs. 304mm stock.
Trending Topics
#10
Addict
Rennlist Member
Rennlist Member
Join Date: Jun 2003
Location: Orange County, CA
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Mine is also a narrow body. They are direct Bolt on, once the rotors are changed. There are NO Spacers needed. They fit perfect with PLENTY of room. I can fit a sponge in between to clean the calipers. There is no chance of them rubbing.
Enjoy!
Enjoy!
#14
Addict
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I don't use the spiders. My brakes sing a little. Next time I have the wheels off, I'll try some anti-squeal paste on the backing plates. It worked like a charm on a friend's 993.