9934SLHD

HELP NEEDED

i need part of the carpet trim as you can see from the photos on both sides and whatever goes in the middle to make it complete PLEASE HELP !

My car is a 1996 Carrera 4S LHD located in London (United Kingdom) - Will purchase from anywhere will pay shipping fees

Thanks Ash

Please part of the carpet trim needed on both sides and part of the middle centre console PLEASE HELP

71-3.0-911

Wait. Wtf happened to your lower dash? You're missing the whole center section with the ash tray, along with the hard backed carpet section. Wow. PM me. I may be able to help.

-Scott

9934SLHD

Long story lol
can't PM as I'm a newbie

JRB

That console piece might not look bad covered in leather (or vinyl even) rather than carpet.

9934SLHD

how you mean sorry? as all the carpet is black and normally that's where the carpet goes and covers the middle (i think)

Talat

I have a centre console trimmed in black by Southbound Trimmers, never fitted after it was trimmed - only drawback is that it's in thinner RS type carpet.

JRB

I was meaning that, if you're having trouble finding a little carpet, then cover the part that has the yellow contact cement on it with some black leather (like what's covering where the radio would be). But if you're wanting to restore it to like original, then I'd buy the pieces from Talat, even if the carpet doesn't match perfect, because those parts are probably hard to find.

9934SLHD

sounds ideal would it cover the hole also will i have any issues fitting the console and carpet as its a thinner piece

surely the thickness wouldn't make any different

could you upload a picture please or email me at jimmy-cakes@outlook.com

Thanks

9934SLHD

sounds like just what i need

Thank you

jac911

You might try talking to Earl at Rothsport in Sherwood, Oregon . He's the parts manager there and has helped me with finding oem parts. Not affiliated, but a happy customer.

JC 96 TT

budge96

I'm certain I am not the only one wondering where in hell did the rest of your lower dash go but hey I'm not one for calling anyone out LOL ...
buddy the center section is where the ash tray mounts I do like how the mounting has moved the entire section up a few inches possibly for someone height challenged or the opposite .
the OG components won't fit since they require the stock amount of space where you have about half in the lower three inches of the dash face .
This should be interesting to complete but initially it appears you will require some non cut down lower dash half to get it redone ...Bert