Durametric Enthusiast Tool engine operating hours
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I cannot recall if the enthusiast version gives access to the 1998 993 engine operating hours, Can anyone chime in with an answer to this? I played with this for about an hour today and finally gave up. It works fine otherwise but no line for engine hours. I have the 6.5/6.6 version. Thanks.
#2
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
As far as I know, operating hours isn't an option on any Durametric for the 993 or prior. Their website seems to confirm that stating that it's only available on the 996 and 997 generation 911's.
http://www.durametric.com/usedporschebuyersguide.aspx
http://www.durametric.com/usedporschebuyersguide.aspx
#3
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks! I did look at that page but I didn't read down far enough LOL
#4
RL Community Team
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Is it something Durametric doesn't access or does the 993 ECU not log running hours?
Andy
Andy
The following 3 users liked this post by kavocat:
#8
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Very interesting - thanks for sharing. I wonder if all 993's have it or if only cars with the onboard computer have it? Kavocat - does yours have onboard computer?
#9
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Kavocat, found it! This '98 has the OBC, perhaps this feature makes logging the operating hours possible. Thanks!
#10
Rennlist Member
#11
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
We are used to searching "HVAC" due to the "reliability" of our Servos we rarely go further ....lol 😆
#13
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Great info everyone. Glad that it seems to be possible despite.
#14
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My Durametric reads mine as well and I have the standard gauge package on my 96 993 C4S.
Last edited by GJSPIN; 05-30-2022 at 01:07 PM.