Rear spolier noise?
#16
Rennlist
Lifetime Member
Lifetime Member
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
If the 2nd connector you are talking about looks like the picture below, then it is the signal wire that connects to the micro switchs that sends the signal to let the tail control module know when the tail is fully extended.
![](http://p-car.com/diy/tail/4pinconjump1.jpg)
#17
Addict
Rennlist Member
Rennlist Member
Join Date: Feb 2002
Location: London UK
Posts: 1,329
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks Robin.
The first cable was easy to disconnect and had 1 'male' pin and 1 'female'. AND DID NOT look like that photo.
The second wouldnt disconnect easily. Im sure with more pressure it would have but I assumed it was the wrong one to disconnect anyway.
The first cable was easy to disconnect and had 1 'male' pin and 1 'female'. AND DID NOT look like that photo.
The second wouldnt disconnect easily. Im sure with more pressure it would have but I assumed it was the wrong one to disconnect anyway.