Offset of 17" cup rims
#1
Racer
Thread Starter
Join Date: Mar 2002
Location: Irvine, CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Offset of 17" cup rims
I have a 993 C2. How to find the offsets of 17" cup rims. I found a number right next to valve stem. Is that the number of the offset? I think my front wheels' offsets should be 55, and I saw 55 right next to front wheels' valve stem. I also saw 55 right next to my rear wheel's valve stem. Are they ET55? <img src="graemlins/r.gif" border="0" alt="[king]" />
#2
Addict
Rennlist Member
Rennlist Member
Join Date: May 2001
Location: Houston, Tx
Posts: 2,956
Likes: 0
Received 0 Likes
on
0 Posts
[quote]Originally posted by Mav:
<strong>I have a 993 C2. How to find the offsets of 17" cup rims. I found a number right next to valve stem. Is that the number of the offset? I think my front wheels' offsets should be 55, and I saw 55 right next to front wheels' valve stem. I also saw 55 right next to my rear wheel's valve stem. Are they ET55? <img src="graemlins/r.gif" border="0" alt="[king]" /> </strong><hr></blockquote>
Yup!
<strong>I have a 993 C2. How to find the offsets of 17" cup rims. I found a number right next to valve stem. Is that the number of the offset? I think my front wheels' offsets should be 55, and I saw 55 right next to front wheels' valve stem. I also saw 55 right next to my rear wheel's valve stem. Are they ET55? <img src="graemlins/r.gif" border="0" alt="[king]" /> </strong><hr></blockquote>
Yup!
#3
I tried search for this information but was unsuccessful.
I have the 17" 993 Cup wheels as mentioned here on my '95 993. The car has been lowered with H&R springs. I have had the inner guards rolled to accom. some 18" wheels in the future. But for now and eventually for these wheels on track days, I would like to space them out further.
1) Is there a standard size spacer that I can safely go with?
2) What effect does that have on wheel studs/nuts?
3) Is it the same for front and back?
Thanks,
Dylan.
I have the 17" 993 Cup wheels as mentioned here on my '95 993. The car has been lowered with H&R springs. I have had the inner guards rolled to accom. some 18" wheels in the future. But for now and eventually for these wheels on track days, I would like to space them out further.
1) Is there a standard size spacer that I can safely go with?
2) What effect does that have on wheel studs/nuts?
3) Is it the same for front and back?
Thanks,
Dylan.