Wheel valuation help wanted
Thread Starter
Rennlist Member
Joined: Jan 2010
Posts: 5,104
Likes: 394
From: Oneida, New York
Wheel valuation help wanted
Wheels are off a 996 TTS, they are the dark GT Silver Metallic color. Wheels come with metal valve stems, and oem center caps included. Fronts are 8”x18”, ET 50, rears are 11”x18” ET 45. The rears were professionally refinished at Wheel Collision Center in June of 2013, and only saw usage for the remainder of that driving season. Both had very minor curb damage, not bent.
The color match was perfect, and to my eye the only noticeable consequence of that refinishing is build up of paint making the et number’s on one rear wheel...not as crisp.
Front wheels are factory original.
All four have very minor imperfections, not concours...but exceptional none the less.
I searched and found one listing from early 2018, for quite a bit of money...and going back to 2015 another set for less.
So, what would be a reasonable amount for these wheels?
Thread Starter
Rennlist Member
Joined: Jan 2010
Posts: 5,104
Likes: 394
From: Oneida, New York
Three Wheelin'
Joined: Feb 2010
Posts: 1,437
Likes: 106
From: Midwest
I bought a pristine set of wheels / tires (good tread, old date codes) from a 996 Turbo a few years ago off of CL, paid $500 for them. After determining they would not fit my 993 NB (doubted they would but figured I could make money) it took me quite a while to get $1000 for them. I hope you get more.
Trending Topics
Rennlist Member
Joined: Aug 2014
Posts: 4,858
Likes: 724
From: Massachusetts
And for the life of me I can't understand why folks line up to pay $3,000 to $4,500 and up for 993 WB Hollow Spokes while these are available. The 996 wheels are about 1/2 kg heavier, but it's worth it for the extra inch of width in the 11" rear wheels.
Rennlist Member
Joined: Oct 2006
Posts: 8,330
Likes: 1,191
From: Vista CA
Wheels are off a 996 TTS, they are the dark GT Silver Metallic color. Wheels come with metal valve stems, and oem center caps included. Fronts are 8”x18”, ET 50, rears are 11”x18” ET 45. The rears were professionally refinished at Wheel Collision Center in June of 2013, and only saw usage for the remainder of that driving season. Both had very minor curb damage, not bent.
The color match was perfect, and to my eye the only noticeable consequence of that refinishing is build up of paint making the et number’s on one rear wheel...not as crisp.
Front wheels are factory original.
All four have very minor imperfections, not concours...but exceptional none the less.
I searched and found one listing from early 2018, for quite a bit of money...and going back to 2015 another set for less.
So, what would be a reasonable amount for these wheels?
50% of that if just selling to a non-turbo S look seeker.
Thread Starter
Rennlist Member
Joined: Jan 2010
Posts: 5,104
Likes: 394
From: Oneida, New York
Any additional pricing suggestions, before I settle on an asking? I cross posted on the 996 TT forum, and got one sugggestion, and a request for price. I didn’t hear back from the gentleman. Suggested asking prices have been between $1-2k, some consensus would be nice.
I will never use these wheels again, so they need a new owner. Is $1750 plus shipping too much...$1500 closer? I don’t want to price them to sit, nor do I want to give them away...so to speak.
Pricing discussion ending in 3, 2......
I will never use these wheels again, so they need a new owner. Is $1750 plus shipping too much...$1500 closer? I don’t want to price them to sit, nor do I want to give them away...so to speak.
Pricing discussion ending in 3, 2......
Thread Starter
Rennlist Member
Joined: Jan 2010
Posts: 5,104
Likes: 394
From: Oneida, New York
that’s the price I mentioned on a PM to a 996TT owner who asked...gotta measure/weigh boxes to estimate shipping costs before I advertise them. That extra cash would come in handy...picking up the car tomorrow after a clutch, major engine out service, corner balance/alignment, as well as other pesky little while it was there things. Damn near 5 digits to the left of the decimal point...but after virtually nothing needed for 8 years, and 63k miles, well worth that investment.