[WTB] Climate Control Sliding Control Knob [WTB]
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
[WTB] Climate Control Sliding Control **** [WTB]
[BOUGHT ONE FROM SONNENPARTS]
thanks!!
Hiya!
Who has an extra sliding control **** / button / thingy lying around?
I would like to buy if possible.
Thank you & have a great day!
-Paul
(pics for reference)
thanks!!
Hiya!
Who has an extra sliding control **** / button / thingy lying around?
I would like to buy if possible.
Thank you & have a great day!
-Paul
(pics for reference)
Last edited by paulkromz; 08-14-2018 at 12:34 PM.
#2
Rennlist Member
Maybe at your local Porsche Service Centre?
#4
Rennlist Member
I agree on the outrageous pricing of these.
However, it is difficult to make a good copy of these. It consists of a black housing and an internal clear plastic light guide/fastener in order to transmit light to the triangle symbol.
3D-printed items of this scale I have seen seem to have a too rough surface and being too flimsy, such as the A/C switch cap prints.
Cheers,
Tore
However, it is difficult to make a good copy of these. It consists of a black housing and an internal clear plastic light guide/fastener in order to transmit light to the triangle symbol.
3D-printed items of this scale I have seen seem to have a too rough surface and being too flimsy, such as the A/C switch cap prints.
Cheers,
Tore
#5
You're right about the rough surface, however there are a number of treatments they can do post-built to get a near gloss finish. Similar parts I've done in nylon are plenty strong, too. Wasn't aware the triangle was a light pipe so obviously won't be able to re-create that. Next part I do I'll piggy back a little snap off part to see how it comes out. All I need is a someone to measure the length, width and height (maybe a pic of the back side) and I'll give it a try.
#7
Technical Guru
Rennlist Member
Rennlist Member
Originally Posted by Jay
You can buy 'em for $30 each, which is outrageous. I can probably 3D print a close replica for less than that. Stay tuned.
Originally Posted by Jay777
All I need is a someone to measure the length, width and height (maybe a pic of the back side) and I'll give it a try.
Trending Topics
#11
RL Community Team
Rennlist Member
Rennlist Member
#12
Rennlist Member
Here's a pic of the backlight. One slider **** is removed.
Cheers,
Tore
Cheers,
Tore
#13
Technical Guru
Rennlist Member
Rennlist Member
#14
Addict
Rennlist Member
Rennlist Member
Thread Starter
thanks for the bumps guys - would be nice to see other options out there.
for now I am happy to purchase one from someone who might have an extra one laying around.
thanks again!
-Paul
for now I am happy to purchase one from someone who might have an extra one laying around.
thanks again!
-Paul