Notices
993 Forum 1995-1998
Sponsored by:
Sponsored by:

Cupholder For A 993?

Thread Tools
 
Search this Thread
 
Old 12-15-2003 | 01:27 AM
  #1  
seefourS's Avatar
seefourS
Thread Starter
3rd Gear
 
Joined: Nov 2003
Posts: 3
Likes: 0
Default Cupholder For A 993?

I just bought a 1997 C4S, and because it is my daily driver, I need a cupholder. Can anyone help me as to where to get one? Thanks
Old 12-15-2003 | 01:30 AM
  #2  
Phil's Avatar
Phil
Phlat Black Guru
Rennlist
Lifetime Member
- Times 2

 
Joined: May 2001
Posts: 4,484
Likes: 1
From: Back In RI...............
Default

VW
If you do a search...you'll find the part number, and install instructions.
Old 12-15-2003 | 01:37 AM
  #3  
David in LA's Avatar
David in LA
Nordschleife Master
 
Joined: Sep 2002
Posts: 6,510
Likes: 1
Default

for a stealthy look what Phil is referring to is the VW Passat cupholder...runs about $30-35 and you can buy online and takes 1 min to install (2 if you use the optional screws). also, I just saw one on ebay for $20. Here it is

Last edited by David in LA; 12-15-2003 at 04:46 AM.
Old 12-15-2003 | 02:44 AM
  #4  
kmatts's Avatar
kmatts
Racer
 
Joined: Nov 2003
Posts: 259
Likes: 0
From: PNW
Default

http://cgi.ebay.com/ws/eBayISAPI.dll...category=10408
Old 12-15-2003 | 04:07 AM
  #5  
Dave Crellin's Avatar
Dave Crellin
Racer
 
Joined: Aug 2001
Posts: 349
Likes: 1
From: Santa Monica, CA
Default

My 2c - I have both the center console cup holder and the VW Passat (95m model) holder.

If I were to keep one, it would definately be the VW holder. Easy to fit and remove, takes decent-size cups and very sturdy. The center console holder JUST takes a regular size aluminum can.
Old 12-15-2003 | 09:29 AM
  #6  
mike cap's Avatar
mike cap
Rennlist Member
 
Joined: Jul 2002
Posts: 4,088
Likes: 343
From: Upstate NY
Default

seefours,

Go here for the best cupholder for your 993....

www.drinkholders.com.
Old 12-15-2003 | 10:20 AM
  #7  
johnt53's Avatar
johnt53
Advanced
 
Joined: Sep 2003
Posts: 73
Likes: 0
From: SE Tennessee
Default

seeefours, I have the VW Passat model, and like it for the following reasons:

1. I have it installed without screws--it slips into an existing slot (do a search) and stays there without threads.

2. It is out of the way, on the passenger side of the tunnel, but easy to reach for the driver.

3. Holds two beverages. Will hold a Starbucks Grande Latte (with sleeve).

4. When closed, it is very unobtrusive.

5. One sort of disadvantage--wife likes to put her purse in the passenger footwell, and with her, the purse, and the drinks, it is a little crowded. However, 95% of my mileage is solo.

Good luck........John
Old 12-15-2003 | 01:02 PM
  #8  
LAURIER's Avatar
LAURIER
Addict
Rennlist Member

 
Joined: May 2001
Posts: 520
Likes: 0
From: Charlotte, USA
Default

Porsche's lame attempt at cup holder design:



Rich

My 993 Web Page

Last edited by LAURIER; 12-15-2003 at 02:27 PM.
Old 12-15-2003 | 01:14 PM
  #9  
RMEllis's Avatar
RMEllis
Addict
Rennlist Member

 
Joined: Aug 2002
Posts: 144
Likes: 0
From: New Orleans, LA
Default

Maybe it is just me but I have done search after search and still cannot find the installation instructions for the Passat cup holder. Can anyone help?
Thanks
Robert
Old 12-15-2003 | 01:33 PM
  #10  
swftiii's Avatar
swftiii
Addict
Rennlist Member

 
Joined: Apr 2002
Posts: 2,079
Likes: 17
From: Parkland, FL
Default

I searched on Cup Holder Install and got this one. Follow the thread and some links within it and you will get an idea of how to install. If there is something else out there others please help.

-Skip
Old 12-15-2003 | 01:34 PM
  #11  
Patentman's Avatar
Patentman
Instructor
 
Joined: Jan 2002
Posts: 123
Likes: 0
From: Boston/Westborough, MA
Default

What about this one on ebay - it is different than the others but claims to work in a Porsche...

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2448693514

The one from drinkholders.com is $50, whereas the one above is $13. Is this a case of get what you pay for?

It does not appear to adjust as much as the drinkholders.com one does. The ones in the center console appear to pose an awkward location to get your drink while driving (having to twist around to get it).
Old 12-15-2003 | 02:06 PM
  #12  
Dave Crellin's Avatar
Dave Crellin
Racer
 
Joined: Aug 2001
Posts: 349
Likes: 1
From: Santa Monica, CA
Default

here;s the link with the part number etc.

https://rennlist.com/forums/showthre...threadid=82842
Old 12-15-2003 | 04:26 PM
  #13  
JasonF's Avatar
JasonF
Burning Brakes
 
Joined: Apr 2003
Posts: 750
Likes: 0
From: Los Angeles
Default

As a total capitulation to my wife (and daughter), I just bought the cupholder unit that replaces the casette deck off an Ebay auction. Unfortunately, I can no longer brag that my car doesn't have a cupholder!
Old 12-15-2003 | 07:18 PM
  #14  
Autobahn's Avatar
Autobahn
Pro
 
Joined: Mar 2003
Posts: 696
Likes: 12
From: USA
Default

Cupholder for a genuine (ie 993) Porsche

I'm just wondering if this topic has ever come up in a Ferrari Forum???
The 993 is a SPORTS car!!!
Old 12-15-2003 | 09:07 PM
  #15  
Coleman's Avatar
Coleman
Three Wheelin'
 
Joined: Jul 2002
Posts: 1,453
Likes: 120
From: Cape Neddick Me.
Default eh?

Eh?
Attached Images  
The following users liked this post:
motorworks2012 (02-07-2021)


Quick Reply: Cupholder For A 993?



All times are GMT -3. The time now is 12:19 PM.