When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Why is that brake light taped up? omg, it totally looks Ugly. Porsche Engineers & Dealers (you all can persuade people at the Corporate office) - I know so many of you are all in here - why? You know it looks ugly, why go with it.
Also I need my PDK Shifter - not some razor. Again you know it is ugly, fix it. Simple.
Also fire the person who gave those suggestions to implement. Make good decisions and your VW stock will go up....don't want your stock to be up?
I'm really trying to reserve final judgment until I can physically walk up to the car but from these pics I'm not 100% sold yet. But there seems to still be a bit of camo and that front plate isn't helping either so I will remain optimistic. I just find that front bumper and hood line to be so odd...
Why is that brake light taped up? omg, it totally looks Ugly. Porsche Engineers & Dealers (you all can persuade people at the Corporate office) - I know so many of you are all in here - why? You know it looks ugly, why go with it.
Looks like parts of rear end are still camouflaged. Brake light will probably look different on final version.
It may have already been said, but the 992 very much reminds me of a modern 964.
This... people saying the car looks more Audi and less Porsche 911 and that the car is losing curves should take a look at older 911s...
You can clearly see how the 992 incorporates design cues from pre-996 generations.
Originally Posted by captainkirk
Why is that brake light taped up? omg, it totally looks Ugly. Porsche Engineers & Dealers (you all can persuade people at the Corporate office) - I know so many of you are all in here - why? You know it looks ugly, why go with it.
Here's a comparison between 991.2 C4S and the 992.
On the left is mostly the photo as-is from the internet. I did duplicate the center brake light to remove the tape. I also added the Porsche logo and adjusted the bottom of the bumper/license plate area. These photos are obviously of a european-spec vehicle, but the US bumper is slightly different (from photos posted in this thread). I've left the right side of the bumper so you can compare a theoretical US-spec versus European-spec, side-by-side.
On the right, I've darkened the image and created a silhouette of each vehicle. Obviously the photos were not taking at the same place, same distance or with the same lens so I've made a little bit of adjustment for perspective. It's not perfect, but at least you can compare.
Also, I'm trying to do a digital measuring "session" based on most of these photos, need higher res though.
Another side now, how do you access the engine? The louvered vent/intake area looked fixed.
Here's a comparison between 991.2 C4S and the 992.
On the left is mostly the photo as-is from the internet. I did duplicate the center brake light to remove the tape. I also added the Porsche logo and adjusted the bottom of the bumper/license plate area. These photos are obviously of a european-spec vehicle, but the US bumper is slightly different (from photos posted in this thread). I've left the right side of the bumper so you can compare a theoretical US-spec versus European-spec, side-by-side.
On the right, I've darkened the image and created a silhouette of each vehicle. Obviously the photos were not taking at the same place, same distance or with the same lens so I've made a little bit of adjustment for perspective. It's not perfect, but at least you can compare.
Also, I'm trying to do a digital measuring "session" based on most of these photos, need higher res though.
Another side now, how do you access the engine? The louvered vent/intake area looked fixed.
Nice work! Maybe some of these useless social media "stars" (Kardashian's) should use you for photoshopping themselves instead of the hack jobs they put out
By the way, the third brake light will be incorporated very well into the design. It has to be!!
Nice work! Maybe some of these useless social media "stars" (Kardashian's) should use you for photoshopping themselves instead of the hack jobs they put out
By the way, the third brake light will be incorporated very well into the design. It has to be!!
Thanks!
From the bulky plastic bits on the rear vents, it could just be a housing for LED illuminated grille.
08-02-2018, 05:20 PM
