992 Rear Diffuser
#1
Rennlist Member
Thread Starter
992 Rear Diffuser
Has anyone picked one of these up and installed (or had installed)?
I contacted Moshammer, provided them with VIN, and am waiting to hear back.
How is it attached? Remove old, install new, install over the original one etc.?
https://automotive.moshammer.com/pro...v=7516fd43adaa
I contacted Moshammer, provided them with VIN, and am waiting to hear back.
How is it attached? Remove old, install new, install over the original one etc.?
https://automotive.moshammer.com/pro...v=7516fd43adaa
Last edited by Winnetka; 04-04-2024 at 07:39 PM. Reason: .
#2
Rennlist Member
the instructions for install are on the site under "Installation:" Install by using the original screw points and with glue.
The following 2 users liked this post by Scott P:
Schwarz992C4S (06-08-2024),
Winnetka (04-05-2024)
#3
Yes I and a few others here have it. The fit was good but not perfect in my case. The 2 existing bottom screws of your car hold it in place, while you’re supposed to use their provided glue for the rest of the sides. That part didn’t work as well for me on one side end even after applying constant pressure on it for a week. But all in all it was worth it and for that discounted price I’d get it. I just probably should have done install thru a shop. Others here have had pretty good results I believe.
The following users liked this post:
aspan (04-08-2024)
#4
Yes I and a few others here have it. The fit was good but not perfect in my case. The 2 existing bottom screws of your car hold it in place, while you’re supposed to use their provided glue for the rest of the sides. That part didn’t work as well for me on one side end even after applying constant pressure on it for a week. But all in all it was worth it and for that discounted price I’d get it. I just probably should have done install thru a shop. Others here have had pretty good results I believe.
The following users liked this post:
RGS (04-07-2024)
#6
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Can't wait to see it. Post up the install experience. And photos!
__________________
Trending Topics
#9
Rennlist Member
Yep I have one also. Easy install but as others mentioned there is a gap on the side. I did not paint mines so gap maybe not as noticeable
https://youtu.be/g-vOgweQNZ8
https://youtu.be/g-vOgweQNZ8
The following users liked this post:
redtanrt10 (04-23-2024)
#11
I just received my yesterday and installed it. Exactly like you guys had mentioned… There is a small gap which can easily be closed with the glue that they included. The PROBLEM is that if I glue this part, then it covers another screw needed for bumper removal. For those of you who glued the end parts, did you remove the screw and just glue the diffuser to the underside of the bumper covering the screw hole and not putting the screw back on? See pics attached.
#12
Drifting
Does anybody have this attached to a Sport Design rear bumper?
#13
Yes I and a few others here have it. The fit was good but not perfect in my case. The 2 existing bottom screws of your car hold it in place, while you’re supposed to use their provided glue for the rest of the sides. That part didn’t work as well for me on one side end even after applying constant pressure on it for a week. But all in all it was worth it and for that discounted price I’d get it. I just probably should have done install thru a shop. Others here have had pretty good results I believe.
Did you glue over the screws at the end parts? Did you try strong double sided tape?
#14
#15
Drifting