When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I don't recall, but I'll try to find out and let you know.
I appreciate it.
I have a new set of wheels that will sit 2mm inboard from yours with the same size Cup2s.
I'm maxed without camber plates at -1.6 square at nearly the same ride height.
I appreciate it.
I have a new set of wheels that will sit 2mm inboard from yours with the same size Cup2s.
I'm maxed without camber plates at -1.6 square at nearly the same ride height.
Thanks. Your car looks great. So perhaps 18-20 mms down but will get it dialed as needed.
Looking forward to getting it done.
Originally Posted by OMGTSilver
The Cup 2's make ALL the difference. I'm lowered on KW HAS, wheel specs 20x9.5 et42 and 21x12.5 et64 255 up front and 315 rear. We put 265 and 325's on, but i thought they looked too big... no rubbing though. Keep in mind that the Cup R's are even meatier than the Cup 2's!
This turned out nice! I'm going to try my 15mm spacers when I get a chance. Are your tires flush or pretty close F & R?
When it's time for new tires, I plan to go with the Cup 2s.
This turned out nice! I'm going to try my 15mm spacers when I get a chance. Are your tires flush or pretty close F & R?
When it's time for new tires, I plan to go with the Cup 2s.
Thank you... I'd have to say they're as flush as possible without rubbing, yes.
Soon! They're in storage but going on within the next couple of weeks.
What widths, offsets and tire sizes are you running? And what camber, if you don't mind sharing?
