When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not a Phi Slamma Jamma but just about right--- if anyone missed my posts here before here:
17mm front and rear pre settling and its circa 20mm now so right under an inch or close.
Looks like you maintained the stock rake F and R. Did you consider lowering the F a bit more or raising the rear a bit to give the car a slightly raked forward look?
@M3Inline6 Are you scraping more now that you swapped out your SD lower lip for the Aerokit lower lip which protrudes lower?
I haven’t scraped yet thankfully. Even with the Sport Design lip I only scraped one time over a 2-year period, and that was while exiting the steepest driveway ever at a boutique hotel in Santa Barbara. I was on stock SPASM suspension at the time. With my current drop on the BILSTEIN EVO’s I am definitely more susceptible to scraping though. My car is sitting very low.
Looks like you maintained the stock rake F and R. Did you consider lowering the F a bit more or raising the rear a bit to give the car a slightly raked forward look?
@AlterZgo I think your drop is perfect. I will be getting my Bilstein EVO's installed soon and want a drop similar to yours. I think you mentioned on a post that you went with 15mm spacers front and back. Is that correct? Would you say that your current setup with the BBS wheels has a similar offset to when you had your stock wheels with the 15mm spacers? I have the stock RS Spyder wheels.
@AlterZgo I think your drop is perfect. I will be getting my Bilstein EVO's installed soon and want a drop similar to yours. I think you mentioned on a post that you went with 15mm spacers front and back. Is that correct? Would you say that your current setup with the BBS wheels has a similar offset to when you had your stock wheels with the 15mm spacers? I have the stock RS Spyder wheels.
Thank you! Yes. I tried 15MM F and 12MM R for a while on stock Carrera Classics then switched to 15MM F and 15MM R and I liked that the best with the stock rims on a lowered car.
This is with the 12mm spacers in the rear. I think it still can fill out a bit more so switched over to 15mm. Don't have good pictures of 15mm spacers on the rear though.
