is there a way to disable the tail lights during daytime running lights DLR with coding? if yes what kind of exact equipment works on 992 2023.

 

>> is there a way to disable the tail lights during daytime running lights DLR with coding? if yes what kind of exact equipment works on 992 2023.

*disable*? Usually they are already off by default in the US.. what region are you in? I used PIWIS to *enable* my rear lights during the day.

In any case you need a PIWIS setup from @rnlst_log .

 

That is funny. It took me forever to find out how to ENABLE rear tail lights with DRLs since they are off by default. I suppose to turn them off it's the inverse. Please check the thread I started eons ago on Coding 992 it's in there.

Yes, PIWIS is needed though I suppose (again) Launch and other analyzers may provide that options as well.

siberian

 

Right, credit to @siberian for the original technique.

 

I am in Canada and tail light is enabled by default. Now that I have swapped to exclusive tail lights when it's always on there's no difference between the red tail light and the smoked exclusive tail lights. That's why I want to disable it. Sorry, again where is the original post for this?

 

@siberian would you please post the link to the original thread? I appreciate it.

 

@alex98ti here's @siberian's original post. Guessing you can just reverse these and set them to 'INACTIVE'??

https://rennlist.com/forums/992/1275...l#post17767990

 

Thanks John, yes I would assume this resets or turns off rear tail lights with DRL

A request to all folks to please use

SEARCH function (by default set to THREADS)

enter (in this case ) the poster's name

SIBERIAN

select ADVANCED

from there select the username (again) followed by whatever keyword you're interested in

That way you don't re-post questions that have already been answered. Thank you

siberian

 

Thank you all!

 

Not working T_T

 

S0-S1 speed cant be equal to S1-S0 speed
it will confuse and thow errors

should be: S0-S1 > S1-S0

 

Hello all

I wanted to hopefully get some insight into my problem I’m having. I took a 992 turbo s steering wheel from another forum member and put it in my 992 gt3. However the horn and buttons no longer work. Ideally I should have done by research and gutted the old one to put into the new wheel but it’s too late

anyone know what I need to do to fix it? I have access to a PIWIS

one of the error codes I try to reset is in the image below. It also says that it can’t communicate with the steering wheel. The paddles do work though

 

Take a look at the following thread. You'll need different hardware. @f4bones mentions the TTS and GT3 have different wiring and you'll need a different clock spring.
https://rennlist.com/forums/992-gt3-...l#post19451717

 

yes I saw his post. I should clarify I’m not trying to add heating I just wanted the new steering wheel

 

Ah. My bad.