When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well for the last 8 911s I have had (including the last 2 992s with Lipo batteries and my 991.2 GT3 Touring (and Mclaren 720s) I connect to both the positive and negative and not the negative ground post. On most cases the ground post is on the other side of the car, and the real reason for the ground post is to prevent arching. For Lipos (and AGM's you can connect directly to the negative post.) You will hear squeals about the BMS, etc and in some cases this is true. There are some cars that will cause an issues (specifically with AGM with BMS that is external from the battery and depending on how they read and ajust to current variances) But for Porsche and coincidently for Mclaren, Lamborghini and Ferrari (I have done it on all these marquees with no issues), you are good to connect to both pos and neg. If not the last 5-10 years for me would have been problematic - no issues what-so-ever.
did you mean to reply to my message? Because i was referring his question about using that main ground post he pictures that already has a load of wires on it. Not the battery post or the negative terminal labeled for charging on the other side of the car..
How long does the CTEK liPo charger stay at the level 2? I’ve just pulled it in directly to my battery post and still on level 2 after 2-3 hours. I didn’t think my battery was that low, I have been driving my car.
How long does the CTEK liPo charger stay at the level 2? I’ve just pulled it in directly to my battery post and still on level 2 after 2-3 hours. I didn’t think my battery was that low, I have been driving my car.
Even after driving it will start with one or two lights for quite a while. Usually after 5-10 hours (if fully charged from driving) it will progress up to full charge (both green lights lit)
Even after driving it will start with one or two lights for quite a while. Usually after 5-10 hours (if fully charged from driving) it will progress up to full charge (both green lights lit)
thanks that was it. Left it over night and this morning it was on the level 8 maintenance. This will be much easier than what I used last year with the Porsche Charge matic and trying to do the 12v footwell socket dance.
So I went to my dealers parts department and discussed what type of battery I have and they were adamant that I have a lithium ion battery. I have a 992 gts with no RAS. They even checked my serial # and confirmed I have lithium ion.
i bought the Porsche charger that has options for both. Hope it all works. Storing car sometime in November.
So I went to my dealers parts department and discussed what type of battery I have and they were adamant that I have a lithium ion battery. I have a 992 gts with no RAS. They even checked my serial # and confirmed I have lithium ion.
i bought the Porsche charger that has options for both. Hope it all works. Storing car sometime in November.
), and thought I would post a few photos so that people can see my approach. Based upon some searching I did on here, I ended up connecting the positive and negative charger leads directly to the positive and negative battery terminals (rather than connecting negative to a ground). I then routed the connector up through the windshield cowl, so it is easily accessible without opening the hood. When not in use, it's capped and totally out of sight.
Going to keep this bad boy in regular use given the absurd replacement cost of the lithium batteries ($2,500).
Were you guys able to connect the eyelets to the positive/negative posts directly? I've read a few people saying you aren't able to unscrew the nuts holding the posts completely, so you can't string the eyelets through without cutting/dremeling the eyelets. I'm about to attempt to hardwire my charger since my 12v outlet is unreliable and want to know what to expect. If unable to remove, I will try connecting to the screw post next to the positive and to negative ground post since I don't have the tool to cut the eyelet.
Also, any issues (e.g. warning lights) after disconnecting/reconnecting battery?
Negative cannot be removed, as stated. Strut tower bolt is a solid ground and 8mm.
Does anyone know if there is a 6mm ground bolt location? I'm trying to hardwire it so can accept charger and boost in case battery dies so I can boost without opening the frunk, but the kit I'm looking at only has m6 size.
Stunning Porsche 356A Super GT Speedster Auction Fails to Meet Reserve
Slideshow: One of the rarest Porsche 356 Speedsters ever built has resurfaced, offering a glimpse into a little-known chapter of the model's competition history.
Theon Goes Full Carbon Fiber With Stunning New Build
Slideshow: Built around a carbon-bodied 964 and a naturally aspirated 4.0-liter flat-six, this bespoke commission highlights how far the restomod formula has evolved.
Tuner Is Converting Porsche 911s Into Shooting Brakes
Slideshow: A Polish Porsche specialist is moving ahead with one of the most unusual 911 conversions in recent memory: a shooting brake version of the 991-generation sports car.
This Coachbuilt Creation Is A Modern Take on the Legendary Porsche 917
Slideshow: A Porsche Carrera GT has been transformed into a one-off coachbuilt machine that blends analog supercar engineering with styling inspired by the legendary 917 race cars.
Is This Convertible Cayenne A Steal, Or A Returnless Investment?
Slideshow: A heavily modified Porsche Cayenne convertible with faux wood trim and a long list of flaws recently sold at auction for surprisingly little money.
