1268

How did u know to go leather or plastic

f4bones

Leather - looks amazing.

kilyung

Any tips on swapping out the airbag cover?

f4bones

It's a bitch to pry the old airbag out from the existing cover - you have to apply pretty significant pressure to pry the metal cover off from around the plastic cover, but eventually it will come. Make sure you mark the orientation correctly as it's possible to re-install with the badge crooked. . . other than that, it's pretty straightforward!

f4bones

I'll post some photos of how I pried mine off if others are going to do this . . I tried several methods before just using a pry bar and levering off the metal surround. . .

ProtechpartsEU

Not complicated,4 screws and a tool to push it out.

f4bones

I pried it out exactly this way - just go slow and be careful. Kind of fun to see what's inside this mini-airbag!!

ProtechpartsEU

all uv sticker collection out now,over 70 steering wheel variants available and over 10 weissach magnetic paddles on stock ready.Explore the new perforated models from st also

ProtechpartsEU

New steering wheels available.Weissach magnetic paddles latest edition in stock also.Dont forget to check out the sticker section also.Other interior items coming soon in our store.

ProtechpartsEU

News
Presenting our new carbom fiber steering wheels.

Custom Build to Order carbon fiber steering wheels made as close as possible to factory quality
Build time 10-14days with pre-order,delivery 2-5 days worldwide
Made in Europe-Romania,possible in both unheated and heated versions
We send only new GT cores to get modified and they keep they small diameter of 36cm/14 inch
Explore the options for preorder from empty core where you move over the old parts to ready plug and play ones.
Thickness has been increased on all parts and a comfort cushion added under the leather to increase comfort while still keeping it race hard.
Customisation options -leave all info and preferinces in the cart order
- choose any center stripe colour in matte or glossy finish,new tehnology where we use real car paint even for matt paints that it looks like real leather.
- original porsche carbon fiber matte or glossy
- any leather or racetex/alcantara colour
- any stitch colour to match original
- original carbon frames in matte or glossy
- custom uv badges


https://protechpartseu.com/collectio...build-to-order

f4bones

Just ordered one - can't wait to fit this to my GT3T. I expect that the quality will be impeccable as every wheel I've purchased (5 so far) from Protechparts has been flawless - truly the best quality provider, and plug and play functionality w/ OEM parts. I'll post up photos once it arrives! Going to look awesome with the Turbonite airbag I purchased from Protechparts as well!

ProtechpartsEU

ProtechpartsEU

another one custom made. with racing yellow-build to order realistic time 5-9 days + 2-5 days shpping,we try to preorder them and keep them done at 50-60% to save on time.

f4bones

Beautiful! I installed the silver one on my GT3 yesterday - I'll post up a complete write up on it shortly, but it's PERFECTION! These custom wheels are the "shizzel" . . .

ProtechpartsEU

Drive mode chrono buttons now available with red dot and turbonite chrome finish on the dials just like on the turbonite emblems.Install part or just swap the dials and dot like in this guide directly.Limited numbers available.