Porsche 911 Turbo S (992)
#16
Former Vendor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Anyone tracks their Porsche with pccb? what's your experience - good or bad.
Since this is the first Porsche "race" car equipped with pccb by following other high profile race cars like McLaren and Ferrari etc. shouldn't there be a reason?
Since this is the first Porsche "race" car equipped with pccb by following other high profile race cars like McLaren and Ferrari etc. shouldn't there be a reason?
#17
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What is the “reason” the poster is seeking?
#18
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So, what's the "reason" in the question? Carbon ceramic brake technology has advanced a long way. Twenty years ago, they were basically fashion accessories. Looked good but really couldn't handle much track work. Since then, they've evolved into very capable brakes for the hardest use most drivers can throw at them. If your Porsche comes with PCCB's, they're not fragile any more. You can leave them on if you're going to the track. The perceived need to switch to iron, so prevalent for so long, is pretty much obsolete.
Against that background, RB's value proposition is pretty simple: "Would you rather pay Porsche prices or RB prices for carbon ceramic consumables?"
#19
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Propaganda thread…
The following 2 users liked this post by CanAutM3:
peterdouglas (08-13-2021),
rk-d (08-13-2021)
#20
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
No forum rules that I am aware of prohibit user JAJ from acting as an [undisclosed] shill for Racing Brake.
But ... maybe there should be.
On second thought - there definitely should be rules against it.
But ... maybe there should be.
On second thought - there definitely should be rules against it.
#21
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I’m sure RacingBrake is an excellent company, but the shilling really turns me off.
The following users liked this post:
peterdouglas (08-13-2021)
#22
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Lots of members post that they like a product from a vendor - why am I being singled out for special treatment because I happen to like this vendor's products?
#23
Burning Brakes
#24
Former Vendor
Thread Starter
#25
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
https://rennlist.com/forums/997-foru...l#post14937724
Ok, so I use a few more words, but like the poster in the above, I like the product. I actually like the product he's talking about too.
#26
Former Vendor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Anyone ever seen this first and the only review posted by Dave Donohue - The professional Porsche racer as a propaganda?
https://rennlist.com/forums/991-gt3-...no-cost-7.html
Just like reading JAJ's review, point it out where you think is a propaganda and debate with your true experience, or knowledge, or whatever you have heard, feel free to express your opinion that's what a forum is all about so rennlist members can learn both sides of stories.
My thought of inviting John to offer his experience on his CCB set up was because he is very similar to most of the Porsche enthusiasts who use their cars both on street and track, but very particular on track improvement and lowering the maintenance cost.
So let's get some real and meaningful discussion on "PCCB Or Not PCCB" which you have seen a dozen of the same title in the past decades. I started this thread under 992 Turbo S for a reason as it's the first Porsche car comes with CCB as default, why Porsche did this? must be a reason yes? and tell Porsche why you think they shouldn't be doing this (with pccb)
If you are a serious track goer I can safely say you should have already rebuilt your Porsche calipers with RB rebuild components, or you are running your calipers w/o dust boots just like those "experts" advised "don't bother in replacing them". Some day this shall apply the same to Porsche brake rotors - If you are a serious track goer you shall be either running on RB-CCB or take some "experts'" advice and run on iron brakes - It's your choice no right or wrong.
We are a brake system developer and all our brake products are developed and made to perform better and last longer than OE and others. Moreover we changed the conventional wisdom on conventional brakes.
Warren-RB
https://rennlist.com/forums/991-gt3-...no-cost-7.html
Just like reading JAJ's review, point it out where you think is a propaganda and debate with your true experience, or knowledge, or whatever you have heard, feel free to express your opinion that's what a forum is all about so rennlist members can learn both sides of stories.
My thought of inviting John to offer his experience on his CCB set up was because he is very similar to most of the Porsche enthusiasts who use their cars both on street and track, but very particular on track improvement and lowering the maintenance cost.
So let's get some real and meaningful discussion on "PCCB Or Not PCCB" which you have seen a dozen of the same title in the past decades. I started this thread under 992 Turbo S for a reason as it's the first Porsche car comes with CCB as default, why Porsche did this? must be a reason yes? and tell Porsche why you think they shouldn't be doing this (with pccb)
If you are a serious track goer I can safely say you should have already rebuilt your Porsche calipers with RB rebuild components, or you are running your calipers w/o dust boots just like those "experts" advised "don't bother in replacing them". Some day this shall apply the same to Porsche brake rotors - If you are a serious track goer you shall be either running on RB-CCB or take some "experts'" advice and run on iron brakes - It's your choice no right or wrong.
We are a brake system developer and all our brake products are developed and made to perform better and last longer than OE and others. Moreover we changed the conventional wisdom on conventional brakes.
Warren-RB
#27
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I prefer to think of myself as a "supporter" of a forum registered vendor. I bought the product - with my own money - I've used it for four years and I like it. That I was invited by @RacingBrake is fully disclosed in my opening post.
Lots of members post that they like a product from a vendor - why am I being singled out for special treatment because I happen to like this vendor's products?
Lots of members post that they like a product from a vendor - why am I being singled out for special treatment because I happen to like this vendor's products?
Posters supporting or endorsing a product who provide verifiable, objective data and information seem to me to be invariably well received.
Posters who provide discursive, long, wordy, off-topic, apparently shilling endorsements which provide mainly subjective, unverified and/or objectively unsupported opinions tend not to be well received or (understandably) given much of any credibility.
Some posters (and some vendors) seem to me personally to fall clearly into one or the other of the two categories, while some cannot be so easily categorized.
To me - in my personal opinion - your posts on this forum have fallen into the shill/“disregard whatever this person says” category on the basis of these criteria.
Of course, you should feel free to continue to post whatever subjective, off/topic, unverified, fact-free opinions you want in this or any other sub-forum - no one can stop you, but you can expect to be treated in a manner that reflects whether or not your posts are objectively informative or just more shilling for one of your sponsors.
No offense intended - but I would plan to research how to block your posts in that case.
Last edited by peterdouglas; 08-17-2021 at 08:40 AM.
The following users liked this post:
CanAutM3 (08-17-2021)
#29
Former Vendor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Any Porsche track driver who had issues with their pccb on tracks and afraid to ask, or being influenced by Jeff's iron kits, here is a good time to hit John with your questions, doubts, and concerns.
Let's discuss something more constructive in a positive way.
#30
Former Vendor
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You can simply "unsubscribe" from this thread and leave this thread to other readers who are interested in learning how CCB works on tracks than making those negative & nonconstructive criticisms.
Warren-RB