For the OCD trackers...
#151
Rennlist Member
y’all are correct. Shows on tyd that it’s mid Atlantic and the buffer has been appended to port processing. Makes more sense now.
#152
Rennlist Member
Thread Starter
FWIW, the Rhea Leader just passed the Panama Canal and has about 12 days to hit SD. So, if the Glovis Sun docs in Columbia on the 9th, it looks like it may hit SD on the 24th or so.
#153
Quick update on the SFL Conductor, it's traveling a bit slowly the last day or two with what looks like some strong winds and rough seas. Bishu is making good time and has a nice tail wind (you can spot it in the lower left of the picture).
This is a quick picture from Marine Traffic, but I added the wind overlay. It was making great time until it got stuck in the 20-25 knot head wind.
This is a quick picture from Marine Traffic, but I added the wind overlay. It was making great time until it got stuck in the 20-25 knot head wind.
#154
Intermediate
Quick update on the SFL Conductor, it's traveling a bit slowly the last day or two with what looks like some strong winds and rough seas. Bishu is making good time and has a nice tail wind (you can spot it in the lower left of the picture).
This is a quick picture from Marine Traffic, but I added the wind overlay. It was making great time until it got stuck in the 20-25 knot head wind.
This is a quick picture from Marine Traffic, but I added the wind overlay. It was making great time until it got stuck in the 20-25 knot head wind.
#156
Rennlist Member
How did you get your VIN?
Last edited by subshooter; 10-02-2021 at 08:53 AM.
#157
Mine was produced on Oct 1. It was actually moved up. I believe that they adjust actual build time to target the ship that is going to your port. If they didn't move my production up, it would have missed the next ship and then would have waited in Emden for three weeks for the next ship to JAX. Alternatively, they could have delayed my build for that later ship too. Maybe that happened to you?
How did you get your VIN?
How did you get your VIN?
#158
Rennlist Member
Thread Starter
SFL Conductor looks like it will hit its projection:
The following users liked this post:
Alpha Ice (10-02-2021)
#161
Rennlist Member
Mine is stuck on "in transit to Emden" still since yesterday. I'm sure it is at port and TMD has just not updated yet. My original production completion was Oct 8th but I believe they moved it up to Oct 1 to catch this ship. Crossing fingers.
#162
@motorwerksgroup
How long was your car car at the port?
When did it arrive at port?
When did not finish production?
When did it get assigned?
Where did you see that assignment? TYD?
Thank you!
#163
Burning Brakes
It's still a nice improvement from the ship schedule saying the 8th. I think if it wasn't dealing with Sam it might have arrived a bit sooner. Still a long ways to go to get to Sparrows Point I feel like.
I just noticed your eta, mine says 10/3 12:00 utc from Maine vessel
I just noticed your eta, mine says 10/3 12:00 utc from Maine vessel
Last edited by Alpha Ice; 10-02-2021 at 10:08 AM.
#164
Rennlist Member
Thread Starter
It's still a nice improvement from the ship schedule saying the 8th. I think if it wasn't dealing with Sam it might have arrived a bit sooner. Still a long ways to go to get to Sparrows Point I feel like.
I just noticed your eta, mine says 10/3 12:00 utc from Maine vessel
I just noticed your eta, mine says 10/3 12:00 utc from Maine vessel
The following users liked this post:
subshooter (10-03-2021)